User manual SONY CDP-CE415

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Before operating the unit, please read this manual thoroughly and retain it for future reference. You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. [. . . ] You can have the player "shuffle" tracks and play in a random order. The player shuffles all the tracks on all discs or on the disc you've specified. You can play all tracks on the specific disc in a random order. The indication appears while the player is "shuffling" the tracks. You can play all tracks on all discs in a random order. You can start Shuffle Play while playing The indication appears while the player is "shuffling" the tracks. You can start Shuffle Play while playing You can specify discs during Shuffle Play (Select Shuffle Play) You can specify discs during ALL DISCS Shuffle Play mode, and the tracks on the specified discs are played in a random order. press DISC 1 ­ 5 to specify the discs after Step 1. Semi-circles appear around the specified disc numbers in the display. You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 32 "steps" -- one "step" may contain a track or a whole disc. Turn AMS ± until the track number you want appears in the display. The track number being programmed flashes and the total playing time including the track appears in the display. Track number being programmed After one second If you've made a mistake If a program is already stored, the last step of the program appears in the display. When you want to erase the whole program, hold down CLEAR until "ALL CLr" appears in the display (see page 17). Other discs Other tracks on the same disc Other tracks on other discs When you want to program the whole disc as one step, skip Steps 3 to 4, and go to Step 5. After the last step in the program, the display shows "End" and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps. This unit can control a second CD player (see "Connecting Another CD Player" on pages 6 and 7). Even when a second CD player is connected, the controls on both of the units will function. When you press the play button on either unit, the operating player stops and the resting player starts. The controls indicated in the illustration below are effective while the MEGA CONTROL button is lit. [. . . ] If you do, the disc and the player may be damaged. ⷠAfter playing, store the disc in its case. Place the player in a location with adequate ventilation to prevent heat build-up in the player. ⷠDo not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. [. . . ]