User manual SONY CDP-CE545

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Before operating the unit, please read this manual thoroughly and retain it for future reference. You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. [. . . ] Hold down CLEAR until "CLEAR" appears in the display. Create a new program following the programming procedure. Erase the last track in the program Add tracks to the end of the program Erase the whole program completely Playing discs of the second CD player 1 press MEGA CONTROL. The MEGA CONTROL button lights up and the display shows the current disc number of the second player. To program tracks, use the controls on the second player. The play starts and the display shows the current disc and track numbers and the playing time of the track. While the MEGA CONTROL button is lit, you can control the second player with the controls on this player as follows: Pause Stop play Locate a disc while the second player is set to Continuous Play mode Locate a track Press X Press x Turn l (DISC) L until the display shows the disc number you want, then push AMS l (DISC) L Press m (­AMS+) M until the display shows the track number you want This player starts loading. If each Disc Name (Disc Memo) of the second CD player has more than 12 characters, the first 12 characters of each are loaded to this player. Labeling discs of the second CD player You can label discs of the second CD player or change the Disc Names (Disc Memos) loaded from the second CD player. To do other operations, use the controls on the second player or the supplied remote. />) and search buttons (m/M) on the remote operate the second player as indicated on the remote. Turn l (DISC) L to select the disc you want, AMS then push l (DISC) L. AMS Turn l (DISC) L until "DISC NAME" appears AMS in the display, then push l (DISC) L. To control the second player directly using the supplied remote Set CD 1/2/3 on the remote to CD 3, which is the same mode set for the second player. To control this player again press MEGA CONTROL. The MEGA CONTROL button goes off and you can control this player. You cannot locate a particular point in a track of the second player using the controls on this player. ⷠSome controls on this player work on the second player differently from they do to this player. Input the new Disc Name (Disc Memo) following the procedure in "Labeling Discs" on pages 24 to 26. Loading the Disc Names (Disc Memos) of the second CD player If the second CD player has the Disc Name (Disc Memo) function (see page 24), you can load the Disc Name (Disc Memo) of the second CD player to this player's memory and display them on this player. The new Disc Names (Disc Memos) are stored on this player's memory, so you cannot display them on the second CD player. When you connect the second player, you can play tracks in this player and those in the second player alternately in any play mode (see "Connecting Another CD Player" on pages 6 and 7). [. . . ] If you do, the disc and the player may be damaged. ⷠAfter playing, store the disc in its case. Before playing, clean the disc with a cleaning cloth. Place the player in a location with adequate ventilation to prevent heat build-up in the player. [. . . ]