User manual SONY CDP-CX250

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before operating the unit, please read this manual thoroughly and retain it for future reference. The instructions in this manual are for model CDP-CX250. You can also use the controls on the remote if they have the same or similar names as those on the player. [. . . ] You will not hear the sound during the operation. After the current disc is played, the next disc you have specified starts playing. If you want to skip to the next disc right away, press ENTER while playing the current disc. A point in a track while monitoring the sound Z a point in a track quickly by observing the display Z You can have the player "shuffle" the tracks and play in random order. The player shuffles all the tracks on all discs or on the disc you specified. You can play discs/tracks repeatedly in any play mode. The player repeats the discs/tracks as follows: When the disc is played in Each time you press SHUFFLE, "ALL DISCS" or "1 DISC" appears in the display. All tracks on all discs in random order All tracks on the specific disc in random order All tracks on all discs in random order All tracks on the current disc in random order The same program When you want to specify the disc for 1 DISC Shuffle Play, turn the JOG dial until the disc number or Disc Memo (see page 17) you want appears in the display. " " appears in the display while the player is "shuffling" the discs or the tracks. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that are not found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. Press PROGRAM until the program number you want (PROGRAM 1, 2 or 3) appears in the display. Other tracks on other discs You can check your program before or after you start playing. Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, "ALL" appears instead of the track number. ) After the last step in the program, the display shows "END" and returns to the original display. You can start playing a disc at any time you want by connecting a timer (not supplied). You can change your program before you start playing. Press CHECK until the track or disc you do not want appears in the display, then press CLEAR Press CLEAR. Each time you press the button, the last track or disc will be cleared. Follow the programming procedure Hold down CLEAR until "ALL CLEAR" appears in the display to erase the whole program, then create a new program following the programming procedure Press one of the play mode buttons to select the play mode you want. When the set time comes, the player turns on and starts playing. [. . . ] Place the player in a location with adequate ventilation to prevent heat build-up in the player. Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. Before playing, clean the disc with a cleaning cloth. [. . . ]