User manual SONY CDP-CX350

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before operating the unit, please read this manual thoroughly and retain it for future reference. The instructions in this manual are for model CDP-CX350. You can also use the controls on the remote if they have the same or similar names as those on the player. [. . . ] Hold down CLEAR until "CLEAR" appears in the display. You can select the program number (PROGRAM 1, 2, or 3) by using the remote Press PROGRAM on the remote repeatedly until the desired program number appears in the display. Press PROGRAM until the program number you want (PROGRAM 1, 2, or 3) appears in the display. First press >10 then press the number button of the track. When the disc has less than 10 tracks, press 10/0 first then press the corresponding number to enter a track number from 1 to 9. All tracks of another disc(s) Other tracks on the same disc Other tracks on other discs You can create up to eight programs in the remote's memory, each containing up to 32 steps by observing the remote's display. Repeat Steps 4 and 5 to program more tracks or discs. To play the program you create, see "Playing the program you create observing the remote's display" on page 25. To erase a track or disc, move the cursor to the step you want to erase in Step 3, then press CLEAR. To change a disc or track you programed, move the cursor to the step you want to change in Step 3, then press the Easy scroll key. Select a new disc or track following Steps 4 and 5. you can label the program in Step 3 Move the cursor (") to the program you want to label by pressing the Easy scroll key up, then press the Easy scroll key. Input the character you want following the procedure in "Labeling discs observing the remote's display" on page 32. Move the cursor (") to "Program input" by using the Easy scroll key, then press the Easy scroll key. You cannot program the second player's tracks by using the remote. Move the cursor to the program you want to create, then press the Easy scroll key. Playing the program you create observing the remote's display Z 1 Move the cursor (") to "Program play" by using the Easy scroll key, then press the Easy scroll key. To program a whole disc, press the Easy scroll key again. To program a certain track of the disc, select the desired track by pushing the Easy scroll key up or down, then press the Easy scroll key. Select the desired program by pressing the Easy scroll key up or down, then press Easy scroll key. You can start playing a disc at any given time by connecting a timer (not supplied). Program Play starts when the player finishes loading the program data from the remote. [. . . ] After removing a disc from the disc slot, store the disc in its case. Before playing, clean the disc with a cleaning cloth. If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. [. . . ]