User manual SONY CDP-CX691

[. . . ] ⷠBe careful not to close the disc lid on your finger. Use your hand to open or close the disc lid. ⷠDo not touch the rotating parts (a disc, etc. If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. [. . . ] Playing time Current track number The music calendar display setting is memorized even when the player is turned off. Index number (page 10) or Custom Index number (page 19) However, the music calendar appears automatically during programme play, delete play, delete shuffle play or custom index play. You can also turn off the music calendar during playback in these playing mode, but it will appear again when you change the mode. You can quickly locate any track while playing a disc by using the =/+ (AMS: Automatic Music Sensor) buttons or the number buttons on the remote. You can also locate a particular point in a track while playing a disc. The next or succeeding tracks (AMS) The current or preceding tracks (AMS) A specific track directly (Direct music selection) By scanning each track for 10 seconds (Music Scan) + repeatedly during playback until you find the track While monitoring the sound + (forward) or = (backward) and hold down until you find the point 0/) SLOW on the remote and hold down until you find the point = repeatedly during playback until you find the track Slowly by monitoring the sound Quickly by observing the display in pause mode Number button of the track 0/) and hold down until you find the point. You will not hear the sound during the operation. 1 MUSIC SCAN on the remote before or during playback. 2 When you find the track you want, press · Press >20 on the remote first, then the corresponding number buttons. Example: To play track number 30 Press >20 first, then 3 and 10. It is a number that divides a track or a disc into sections, enabling you to easily locate a desired point. You can start Shuffle Play while playing You can delete unwanted tracks during Shuffle Play (Delete Shuffle Play) Press the number button of the track you want to delete while "SHUFFLE" appears in the display. The track number and "OFF" appear in the display, and then the track number disappears from the music calendar. If you want to restore the track, press the number button again. Last Total playing programmed time track Playing order If you've made a mistake Press CLEAR, then press the correct number button. When tracks, which aren't numerically consecutive on the disc, are programmed consecutively (i. You can delete unwanted tracks and play only the remaining tracks. The programme remains even after the Programme Play ends when you press · , you can play the same programme again. ­ ­" appears instead of the total playing time in the display when it exceeds 100 minutes. ⷠ"FULL" appears in the display when you try to add a track to a programme which already contains 24 tracks. ⷠWhen the power is turned off, programmed tracks are deleted, and the play mode returns to the continuous play mode. You can check your programme before or after you start playing. [. . . ] C during playback C during playback When you find the point points for 10 seconds you want, press · You cannot use the index search function (see page 10). ⷠUse C/c buttons to locate the next or the current Custom Indexes, instead of =/+ buttons. The player repeats the portion for 3 seconds from the point to be indexed. Press 0 or ) to adjust the point so that the player repeats from the exact point you want to index. [. . . ]