User manual SONY CDP-CX90ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before operating the unit, please read this manual thoroughly and retain it for future reference. The instructions in this manual are for models CDP-CX270 and CDP-CX90ES. You can also use the controls on the remote if they have the same or similar names as those on the player. [. . . ] You can change your program before you start playing. Press CHECK until the track or disc you do not want appears in the front panel display, then press CLEAR Press CLEAR. Each time you press the button, the last track or disc will be cleared. Follow the programming procedure Hold down CLEAR until "ALL CLEAR" appears in the front panel display to erase the whole program, then create a new program following the programming procedure Erase the last track or disc in the program Add tracks or discs to the end of the program Change the whole program completely Other discs Other tracks on the same disc Other tracks on other discs 2, 3 and 6 4 through 6 2 through 6 Until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the front panel display. Hold down CLEAR until "ALL CLEAR" appears in the front panel display. While creating programs You can select the discs/tracks by checking the titles. While selecting a disc, the on-screen display shows the disc titles in the order of the disc number. When you connect the second player (see page 6), you can play the discs/tracks in this player and those in the second player alternately in Continuous Play and Shuffle Play modes. Each time the current player changes to the other player, the sound from both players is mixed. The current player ends play by fading out, and the other player starts play by fading in. While selecting a track, the on-screen display shows the track titles. Press CONTINUE or SHUFFLE to select the play mode you want. "G-FADE" appears in the front panel display and the G-FADE button lights up. When checking the programs The on-screen display shows the disc and track numbers of each step in the programmed order. Step number Program number The player alternately plays Tracks of all discs from each player in the order of the disc number Tracks on the selected discs from each player Tracks of all discs from each player in random order Tracks on the selected discs from each player in random order The program number (1, 2 or 3) you are checking appears in the upper right corner of the on-screen display. The player automatically selects the repeat mode when G-Fade Play starts. So, the play doesn`t stop if the player has played all the discs/tracks in one player ahead of the other player. You cannot use the Sort and Group Play functions during G-Fade Play. During G-Fade Play, the PLAYER SELECT, INPUT and ENTER buttons and the JOG dial do not work. You cannot use the G-Fade Play function when connected to the CD player CDP-CX153. If you have a Sony receiver (amplifier) with the onscreen display control function, you can control the player using the remote supplied with the receiver (amplifier). You can start playing a disc at any time you want by connecting a timer (not supplied). [. . . ] If you do, the speakers may be damaged when a peak level portion is played. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. [. . . ]