User manual SONY CDP-D500

[. . . ] Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about an hour until the moisture evaporates. Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played. [. . . ] Press TIME/TEXT (or TIME on the remote) repeatedly until the information you want to check appears (see page 9). You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) on the player or number buttons on the remote. You can also locate a particular point in a track while playing a disc. If your CD TEXT disc is not equipped with other languages, "CAN'T SELECT" appears in the display when you press the LANGUAGE button. ⷠIf you press LANGUAGE while playing a CD TEXT disc, the current operating language appears momentarily. ⷠThe operating language you have selected remains until you turn off the power. Each time you press DISPLAY ON/OFF on the remote while playing a disc, the display turns off and on alternately. Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again. Before you start playing, when you press DISPLAY ON/OFF to turn off the display, "DISPLAY OFF" appears, and when you press the button to turn on the display, "DISPLAY ON" appears. Turn AMS ± clockwise until you find the track. You can play a specific portion in a track repeatedly. This might be useful when you want to memorize lyrics. Note that you cannot repeat a portion extending to two tracks. While playing a disc, press A ­ B on the remote when you find the starting point (point A) to be played repeatedly. The player plays this specific portion repeatedly. The player repeats the tracks as follows: When the disc is played in Setting a new starting point You can move the repeating portion ahead by changing the starting point. 1 Press A ­ B while the player is repeating the specific portion. The player repeats between the new starting and ending points. When you want to restart from the starting point A You can have the player "shuffle" tracks and play in a random order. You can arrange the order of the tracks on a disc and create your own programme. Press PLAY MODE repeatedly until "PROGRAM" appears in the display before you start playing. [. . . ] This enables easy location of tracks using the AMS function of the deck . You can fade in to resume playing in Step 4 Time Fade will be cancelled if you press 0 or ) during the operation. ⷠ"HALF" does not appear when the disc has more than 24 tracks. Using these functions makes recording CDs more convenient. [. . . ]