User manual SONY CDP-X5000

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Caution - The use of optical instruments with this product will increase eye hazard. â· Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. [. . . ] You can determine if a disc uses indexes by its packaging. Note You can extend the playing time during Music Scan (or in stop mode) Press MUSIC SCAN on the remote repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. Each time you press MUSIC SCAN during scanning playback, the playing time is extended by the displayed time. You can use music scan during repeat play, shuffle play or programme play. You can play tracks repeatedly in any play mode. While the track you want is being played, press REPEAT on the remote repeatedly until "REPEAT 1" appears in the display. You cannot repeat the current track while the disc is played in Custom Index Play mode (see page 19). You can play a specific portion in a track repeatedly. This might be useful when you want to memorize lyrics. Note that you cannot repeat a section that extends between two tracks. While playing a disc, press A~B on the remote at the point you want to start from (point A). The player plays this specific portion repeatedly. When the disc is played in Press REPEAT repeatedly until "REPEAT" disappears from the display. Setting a new starting point You can move the portion being repeated ahead by changing the starting point. 1 Press A~B while the player is repeating the specific portion. The player repeats between the new starting and end points. You can start again from point A at any time You can have the player "shuffle" the tracks and play them in a random order. You can arrange the order of the tracks on a disc and create your own programme. The indication appears while the player is "shuffling" the tracks. Press the number buttons for the tracks you want to programme in the order you want. To programme the track numbered over 20, use the >20 button on the remote (see page 10). [. . . ] Pressing these buttons 7 times moves the point by about 1 second ahead or behind. Playing from one index to the next one (Custom Index Single Play) 2 Press the number button of the Custom Index you want. Playback starts from the selected Custom Index and stops at the beginning of the next index. You can play the portion between two indexes repeatedly Press CHECK repeatedly until the Custom Index number you want to erase flashes. [. . . ]