User manual SONY CDP-XA555ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Before operating the unit, please read this manual thoroughly and retain it for future reference. The instructions in this manual are for model CDP-XA555ES. [. . . ] Example: To programme the tracks 2, 8, and 5 Press the number buttons in order 2, 8, and 5. You can change your programme before you start playing. Press CHECK until the undesired track appears in the display, then press CLEAR. Last programmed Total playing time Programmed track tracks Playing order To select a track with a number over 10 Each time you press programme the button, the last track will be cleared. Add tracks to the end of Turn AMS ± until the track the programme number you want to add appears, then push AMS ±. Create your programme (when recording onto a tape, first decide the programme for side A) while checking the total playing time indicated in the display. see "Creating Your Own Programme" on page 13. When you record on both sides of the tape, press P to insert a pause. " When you record on one side of the tape or on a DAT or MD, skip this step and go to Step 4. a pause is counted as one track You can programme up to 23 tracks when you insert a pause. Repeat Step 1 to create the programme for side B. start recording on the deck and then press ( on the player. When you record on both sides of the tape, the player pauses at the end of the programme for side A. To record on side B, reverse the tape and press ( or P on the player to resume playing. You can automatically insert a blank space of 3 seconds between each track You can check the total playing time while programming "SIDE-A" appears while checking the programme for side A, and "SIDE-B" while checking the programme for side B. You can have the player create a programme that will fit the length of the tape. select one of the following options: · Time Edit: automatically creates a programme, keeping the original order of the disc. ⷠJust Edit: automatically arranges the track order to fit the tape length. The programme can contain up to 24 tracks (a pause inserted between tracks is counted as one track). Note that tracks with numbers over 24 cannot be programmed. When you record on both sides of the tape, press EDIT/TIME FADE again. The player inserts a pause, then creates the programme for side B. [. . . ] Place the player in a location with adequate ventilation to prevent heat build-up in the player. ⷠDo not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. ⷠDo not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. The use of any other stabilizer may damage the player. [. . . ]