User manual SONY CDP-XB820

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Caution -- The use of optical instruments with this product will increase eye hazard. ⷠShould any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. [. . . ] Turn AMS ± until you find the track number you want. When using the remote, press the number button of the track. When you find the track you want, press · By selecting the type of filter you want, you can adjust the sound to match your system, your speakers, etc. By scanning each track for 10 seconds (Music Scan) A point while Press ) (forward) or 0 (backward) monitoring the sound and hold down until you find the point. A point quickly by Press ) (forward) or 0 (backward) observing the display and hold down until you find the during pause point. You will not hear the sound during the operation. When you directly locate a track numbered over 10 3 Press >10 first, then the corresponding number buttons. Example: To play track number 30 Press >10 first, then 3 and 10. You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. The display shows the digital filter type you select. If you change the type of digital filter during play, the sound will be interrupted momentarily. The Digital Filter function primarily changes characteristics outside the audible frequency. They cannot affect changes within the audible frequency such as those provided by the tone controls of the amplifier. Therefore, with certain combinations of hardware and software, there may be no noticeable effect after switching the filter. ⷠIf you change the type of digital filter during Peak Search (See page 18), the type of filter appears in the display when Peak Search is finished. You can play tracks repeatedly in any play mode. You can repeat only the current track in any play mode. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. You can play a specific portion in a track repeatedly. This might be useful when you want to memorize lyrics. Note that you cannot repeat a portion extending to two tracks. [. . . ] Before you start playing, press PEAK SEARCH. "PEAK" flashes in the display and the player starts scanning the disc searching for the highest peak level. After scanning all the tracks, the player repeats the portion with the highest peak level. To keep the disc clean, handle the disc by its edge. [. . . ]