User manual SONY CDP-XE200

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) on the player or number buttons on the remote. You can also locate a particular point in a track while playing a disc. When you directly locate a track numbered over 10 when using the remote (except for CDP-XE200) Press >10 first, then the corresponding number buttons. Example: To play track number 30 Press >10 first, then 3 and 10. You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. You can play tracks repeatedly in any play mode. Turn AMS ± clockwise until you find the track. When using the remote, press + repeatedly until you find the track. Turn AMS ± counterclockwise until you find the track. When using the remote, press = repeatedly until you find the track. Turn AMS ± until you find the track number you want appears in the display. When using the remote, press number button of the track (except for CDP-XE200). When you find the track you want, press · By scanning each track for 10 seconds (Music Scan) (CDPXE500 only) The player repeats the tracks as follows: When the disc is played in A point while ) (forward) or 0 (backward) and monitoring the sound hold down until you find the point A point quickly by ) (forward) or 0 (backward) and observing the display hold down until you find the point. During pause You will not hear the sound during the operation. Press REPEAT repeatedly until "REPEAT" disappears from the display. You can repeat only the current track in any playmode. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. You can arrange the order of the tracks on a disc and create your own program. You can have the player "shuffle" tracks and play in a random order. The indication appears while the player is "shuffling" the tracks. Press PLAYMODE repeatedly until "PROGRAM" appears in the display before you start playing. [. . . ] You can fade in to resume playing in Step 4 Time Fade will be cancelled if you press 0 or ) during the operation. The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording. To keep the disc clean, handle the disc by its edge. Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car. [. . . ]