User manual SONY CDP-XE530

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Caution -- The use of optical instruments with this product will increase eye hazard. ⷠShould any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. [. . . ] Before you start playing, when you press DISPLAY ON/OFF to turn off the display, "DISPLAY OFF" appears, and when you press the button to turn on the display, "DISPLAY ON" appears. Turn AMS ± clockwise until you find the track. When using the remote, press + repeatedly until you find the track. Turn AMS ± counterclockwise until you find the track. When using the remote, press = repeatedly until you find the track. Turn AMS ± until you find the track number you want. When using the remote, press the number button of the track. When you find the track you want, press · You can play tracks repeatedly in any play mode. By scanning each track for 10 seconds (Music Scan) (CDP-XE530 only) A point while Press ) (forward) or 0 (backward) monitoring the sound and hold down until you find the point. A point quickly by Press ) (forward) or 0 (backward) observing the display and hold down until you find the during pause point. You will not hear the sound during the operation. The player repeats the tracks as follows: When the disc is played in When you directly locate a track numbered over 10 Press >10 first, then the corresponding number buttons. Example: To play track number 30 Press >10 first, then 3 and 10. You can extend the playing time during Music Scan (CDP-XE530 only) Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. You can repeat only the current track in any play mode. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. You can play a specific portion in a track repeatedly. This might be useful when you want to memorise lyrics. Note that you cannot repeat a portion extending to two tracks. You can have the player "shuffle" tracks and play in a random order. While playing a disc, press A ­ B on the remote when you find the starting point (point A) to be played repeatedly. [. . . ] Once you set the time fade, it works twice, that is, the play fades out at the end of both sides of a tape. Time Fade will be cancelled if you press 0 or ) during the operation. ⷠ"HALF" does not appear when the disc has more than 24 tracks. The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording. [. . . ]