User manual SONY CDP-XE800

[. . . ] Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about an hour until the moisture evaporates. Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played. [. . . ] â· The operating language you have selected remains until you turn off the power. Each time you press DISPLAY ON/OFF on the remote while playing a disc, the display turns off and on alternately. Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again. Before you start playing, when you press DISPLAY ON/OFF to turn off the display, "DISPLAY OFF" appears, and when you press the button to turn on the display, "DISPLAY ON" appears. Turn l AMS L clockwise until you find the track. When using the remote, press > repeatedly until you find the track. Turn l AMS L counterclockwise until you find the track. Turn l AMS L until you find the track number you want. When using the remote, press the number button of the track. When you find the track you want, press H to start playing the track. The player repeats the tracks as follows: When the disc is played in Setting a new starting point You can move the repeating portion ahead by changing the starting point. 1 Press A y B while the player is repeating the specific portion. The player repeats between the new starting and ending points. When you want to restart from the starting point A You can have the player "shuffle" tracks and play in a random order. You can arrange the order of the tracks on a disc and create your own programme. Press PLAY MODE repeatedly until "PROGRAM" appears in the display before you start playing. Turn l AMS L until the track number you want appears in the display. Total playing time Playing order Track number being programmed The indication appears while the player is "shuffling" the tracks. Last programmed track Total playing time Playing order If you've made a mistake You can start Shuffle Play while playing Repeat Steps 2 and 3 to programme the tracks in the order you want. When tracks, which aren't numerically consecutive on the disc, are programmed consecutively (i. The programme remains until erased (see page 15) or until you press A OPEN/CLOSE The programme you have created remains even after the Programme Play mode ends or you select another play mode. [. . . ] You can change discs during Time Fade If the play ends before the specified fade-out time, (for example, when you record CD-singles on a tape) you can change the disc. When the space between tracks is too short for the AMS function to work, you can insert a blank space of 3 seconds between each track while playing. This enables easy location of tracks using the AMS function of the deck . You can fade in to resume playing in Step 4 Time Fade will be cancelled if you press m or M during the operation. [. . . ]