User manual SONY CDP-302

[. . . ] If you do, the speakers may be damaged when a peak level portion is played. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. Before operating the player, check that the operating voltage of the player is identical with your local power supply. [. . . ] Press TIME/TEXT (or TIME on the remote) repeatedly until the information you want to check appears (see page 8). You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) on the player or number buttons (for the CDP-302 and CDP-XE320) on the remote. You can also locate a particular point in a track while playing a disc. If your CD TEXT disc is not equipped with other languages, "CAN'T SELECT" appears in the display when you press the LANGUAGE button. ⷠIf you press LANGUAGE while playing a CD TEXT disc, the current operating language appears momentarily. ⷠThe operating language you have selected remains until you turn off the power. Each time you press DISPLAY ON/OFF on the remote while playing a disc, the display turns off and on alternately. Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again. Before you start playing, when you press DISPLAY ON/OFF to turn off the display, "DISPLAY OFF" appears, and when you press the button to turn on the display, "DISPLAY ON" appears. Turn AMS ± clockwise until you find the track. 1 Press A ­ B while the player is repeating the specific portion. The player repeats between the new starting and ending points. When you want to restart from the starting point A Indication appears while the player is The "shuffling" the tracks. You can start Shuffle Play while playing You can arrange the order of the tracks on a disc and create your own programme. CDP-302 Last programmed track Total playing time Playing order After one second CLEAR AMS ± If you've made a mistake Press PLAY MODE repeatedly until "PROGRAM" appears in the display before you start playing. Repeat Steps 2 and 3 to programme the tracks in the order you want. Turn AMS ± until the track number you want appears in the display. CDP-302 Total playing time Playing order Track number being programmed When tracks, which aren't numerically consecutive on the disc, are programmed consecutively (i. CDP-XE320 and CDP-XE220 Track number being Total playing time programmed The programme remains until erased (see page 13) or until you press §OPEN/CLOSE The programme you have created remains even after the Programme Play mode ends or you select another play mode. The total playing time doesn't appear in the display when it exceeds 100 minutes. ⷠIf you programme a track numbered over 24 (or 68 for the CDP-XE320 and CDP-XE220), "­ ­ . [. . . ] ⷠIf you press FADER during Music Scan (page 10), fading time changes to 2 seconds. You can change discs during Time Fade If the play ends before the specified fade-out time, (for example, when you record CD-singles on a tape) you can change the disc. You can fade in to resume playing in Step 4 You can have the player fade out automatically by specifying the playing time. Once you set the time fade, it works twice, that is, the play fades out at the end of both sides of a tape. [. . . ]