User manual SONY CDP-620ESII

[. . . ] AC power cord must be changed only at the qualified service shop. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] Until "REPEAT" or "REPEAT 1" disappears. Cancel Repeat Play ALL DISCS (Continuous Play) 1 DISC (Continuous Play) ALL DISCS SHUFFLE 1 DISC SHUFFLE PROGRAM All discs in the player consecutively in the order of disc number. Only the disc you've selected. When you are in the Repeat Play function, the player repeats the tracks as follows: When the disc is played in The player repeats All tracks on all discs in random order. All tracks on the specific disc in random order. The tracks on the CD in the order you want them to be played (see "Programming the CD tracks" on page 11). Continuous Play (ALL DISCS) Continuous Play (1 DISC) Shuffle Play (ALL DISCS) Shuffle Play (1 DISC) Program Play (page 11) All the tracks on all discs All the tracks on the current disc All the tracks on all discs in random order All the tracks on the current disc in random order The same program 2 Press H. Tips · You can select the disc you want to start playing first by pressing one of the DISC 1 ­ 5 buttons. · You can specify discs during ALL DISCS Shuffle Play mode, and the tracks on the specified discs are played in a random order. Press DISC 1 ­ 5 to specify the discs after Step 1. Semi-circles appear around the specified disc numbers in the display. To cancel the selected discs, press DISC 1 ­ 5 again. To return to ALL DISCS Shuffle Play, press PLAY MODE until "ALL DISCS SHUFFLE" appears in the display. · You can select the playing mode by pressing CONTINUE, SHUFFLE, or PROGRAM on the remote (CDP-620ESII ONLY). 8 Other Operations To Do this Using the CD display You can check information about the disc using the display. In the stop mode Press TIME. Current disc number ALL DISCS DISC Stop playback Pause Select a track Press x. During play or pause, turn lAMSL clockwise (to go forward) or counterclockwise (to go backward) (or press >( to go forward) or . · The program remains until you erase it or turn off the player. If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren't found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. · For the recording to the A side or B side of the cassette tape, you can pause Program Play. Note Playing CDs The track number that you programmed, the playing order, and the total playing time appear in the display. If you've made a mistake The total playing time doesn't appear when: -- You have programmed a track whose number exceeds 20. -- The total playing time of the program exceeds 200 minutes. Press CLEAR, then repeat Step 2. Tip Checking the track order You can check your program before or after you start playing. Press CHECK. You can select the track using the number buttons on the remote. To select a track with a number over 10, use >10 (see page 9). 4 To program other discs or tracks, do the following: To program Repeat Step(s) Other discs Other tracks on the same disc Other tracks on other discs 2 3 2 and 3 Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and "AL" indication) of each step in the programmed order. After the last step in the program, the display shows "End" and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps. 5 Press H to start Program Play. continued 11 Recording From CDs Programming the CD tracks (continued) Changing the track order You can change your program before you start playing. To You need to Recording a CD by Specifying Tape Length (Time Edit) You can have the player create a program that will fit the length of the tape. The player automatically creates a program, keeping the original order of the disc. The program can contain up to 32 steps (a pause inserted between steps is counted as one step). [. . . ] · Do not stick paper or tape on the disc. On power sources · Before operating the player, check that the operating voltage of the player is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the player. · The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. · If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. [. . . ]