User manual SONY CDP-C365

[. . . ] ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. Welcome! Thank you for purchasing this Sony Compact Disc Player. Before operating the unit, please read this manual thoroughly and retain it for future reference. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. About This Manual The instructions in this manual are for model CDP-C365. Owner's Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. [. . . ] If the disc title has more than 20 characters, only the first 20 characters of the disc title are stored (see page 11). When you replace a disc with a CD TEXT disc, the disc title of the CD TEXT disc is also stored automatically. Note that you cannot change the Disc Name of a CD TEXT disc. You can Label discs using up to 20 characters Delete unwanted tracks and store only the tracks you want Group discs in up to eight groups, to locate them easily Classify discs according to an artist name z You can label discs while the front cover is open Labeling discs on the player MENU/NO YES JOG Where are Custom Files stored? Custom Files are stored not on the disc, but in the player's memory. Therefore you cannot use Custom Files when you play the disc on other players. I/1 If you replace discs with Custom Files The Custom File information you have stored remains, since the Custom File information is assigned to each slot. Erase all the Custom Files (Disc Name, Delete Bank, Group File, and Artist File) of the old disc, and then file the new disc information in the Custom Files. CLEAR . AMS > 1 Erasing all Custom Files of all discs 1 2 3 4 Press MENU/NO. Turn the JOG dial until "ALL ERASE ?" appears. "ALL ERASE" appears in the display, and all Custom Files are erased. Turn the JOG dial until the disc number to which you want to assign a Disc Name appears in the display. When you label a disc with the front cover closed, the disc number of the disc at the playing position appears. When you label a disc with the front cover open, the disc number at the loading position appears. The flashing cursor ( ) appears. 2 3 Note When you perform the operation as described above, all of your own settings are deleted and the original factory settings are restored. 20 Storing Information About CDs (Custom Files) 4 Turn the JOG dial until the desired character appears in the display. Press CAPS to find the desired letter type. Each time you press the button, the letter type changes cyclically among capital letters (A), small letters (a), and numbers (1). To select a symbol, select the capital or small letter type. The selected letter type appears in the display. 2nd NEXT DISC ART. MIN STEP SEC To insert a space, press SPACE once. To input a number, press CAPS twice to change the letter type, then press the desired number button. 6 Press > to select the character. The selected character lights up, and the flashing cursor appears at the next space to be input. You can also go to the next space by pressing other number buttons. Repeat Steps 4 through 6 to input more characters. The Disc Name lights up in the display. 2nd NEXT DISC ART. MIN STEP SEC 7 8 ********* **** ALL 1 DISC S SHUFFLE REPEAT 1 GROUP PROGRAM 1 2 3 X-FADE DELETE MULTI CD TEXT NO DELAY CD1 CD2 CD3 SONYHITS* **** ALL 1 DISC S SHUFFLE REPEAT 1 GROUP PROGRAM 1 2 3 X-FADE DELETE MULTI CD TEXT NO DELAY CD1 CD2 CD3 Letter type Repeat Steps 1 through 8 to assign Disc Names to other discs. 5 To input a letter, press the number button corresponding to the desired letter (indicated beside each number button). [. . . ] Wipe the disc from the center out. On placement · Place the player in a location with adequate ventilation to prevent heat build-up in the player. · Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. · Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. On operation · If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. [. . . ]