User manual SONY CDP-C5F

[. . . ] ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. Welcome! Thank you for purchasing the Sony Compact Disc Player. Before operating the unit, please read this manual thoroughly and retain it for future reference. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. About This Manual The instructions in this manual are for models CDP-CX270 and CDP-C5F. Owner's Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. [. . . ] You will not hear the sound during the operation. Playing Repeatedly You can play discs/tracks repeatedly in any play mode. REPEAT a point in a track while monitoring the sound Z a point in a track quickly by observing the display Z Note If "OVER" appears in the front panel display, the disc has reached the end while you were pressing the ) button. Press 0 or to go back. Press REPEAT while playing a disc. "REPEAT" appears in the front panel display. The player repeats the discs/tracks as follows: When the disc is played in ALL DISCS Continuous Play (page 10) 1 DISC Continuous Play (page 10) ALL DISCS Shuffle Play (page 18) 1 DISC Shuffle Play (page 18) Program Play (page 18) The player repeats All tracks on all discs All tracks on the current disc All tracks on all discs in random order All tracks on the current disc in random order The same program Checking the track titles using the on-screen display Z After labeling tracks (see page 24), you can select the track you want before you start playing while checking the track titles. 1 Press TRACK/SPACE. Track number Disc number To cancel Repeat Play Press REPEAT repeatedly until "REPEAT OFF" appears in the front panel display. Repeating the current track (Repeat 1) You can repeat only the current track. While the track you want is being played, press REPEAT repeatedly until "REPEAT 1" appears in the front panel display. The track titles stored in Delete File appear indented (see "Storing Specific Tracks" on page 28). 2 3 Press Â/µ to select the track you want. The track number being played is highlighted in the on-screen display. 17 Playing CDs You can go to the next disc during 1 DISC Shuffle Play Playing in Random Order (Shuffle Play) You can have the player "shuffle" the tracks and play in random order. The player shuffles all the tracks on all discs or on the disc you specified. SHUFFLE · ENTER JOG Press DISC SKIP +. You can specify the next disc to play during 1 DISC Shuffle Play Turn the JOG dial to specify the next disc. After all the tracks on the current disc are played in random order, the next disc starts playing. If you want to skip to the next disc right away, press ENTER while playing the current disc. Notes · You cannot specify the next disc to play during ALL DISCS Shuffle Play. · Even if you press the p button or turn off the player during ALL DISCS Shuffle Play, the player remembers which discs/tracks were played and which were not. Therefore, if you want to start ALL DISCS Shuffle Play again from the beginning, be sure to repeat the procedure from Step 1. 1 Press SHUFFLE to select ALL DISCS or 1 DISC Shuffle Play mode. Follow the programming procedure Hold down CLEAR until "ALL CLEAR" appears in the front panel display to erase the whole program, then create a new program following the programming procedure The track being programmed DISC Erase the last track or disc in the program Add tracks or discs to the end of the program Change the whole program completely PROGRAM1 CD2 *DISC-2O* 2O 3 1 DISC TRACK 2O STEP The disc being programmed Playing order 7 To program other discs/tracks, do the following: To program Other discs Other tracks on the same disc Other tracks on other discs Repeat Steps 2, 3 and 6 4 through 6 2 through 6 Erasing the programs stored in memory 1 Press PROGRAM repeatedly in the stop mode until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the front panel display. 8 Press · to start Program Play. 2 To cancel Program Play Press CONTINUE. Hold down CLEAR until "ALL CLEAR" appears in the front panel display. 20 Getting Started Playing CDs Creating programs while checking the on-screen display information While creating programs You can select the discs/tracks by checking the titles. While selecting a disc, the on-screen display shows the disc titles in the order of the disc number. Disc number Playing Alternately (G-Fade Play) When you connect the second player (see page 6), you can play the discs/tracks in this player and those in the second player alternately in Continuous Play and Shuffle Play modes. Each time the current player changes to the other player, the sound from both players is mixed. The current player ends play by fading out, and the other player starts play by fading in. CONTINUE SHUFFLE G-FADE · While selecting a track, the on-screen display shows the track titles. Disc number and disc title 1 2 Press CONTINUE or SHUFFLE to select the play mode you want. "G-FADE" appears in the front panel display and the G-FADE button lights up. When you select ALL DISCS Continuous Play (page 10) 1 DISC Continuous Play (page 10) ALL DISCS Shuffle Play (page 18) 1 DISC Shuffle Play (page 18) 3 Track number When checking the programs The on-screen display shows the disc and track numbers of each step in the programmed order. Step number Program number The player alternately plays Tracks of all discs from each player in the order of the disc number Tracks on the selected discs from each player Tracks of all discs from each player in random order Tracks on the selected discs from each player in random order The program number (1, 2 or 3) you are checking appears in the upper right corner of the on-screen display. The player automatically selects the repeat mode when G-Fade Play starts. So, the play doesn`t stop if the player has played all the discs/tracks in one player ahead of the other player. (Continued) 21 Playing CDs To cancel G-Fade Play Press G-FADE again. Notes · You cannot use the Sort and Group Play functions during G-Fade Play. · During G-Fade Play, the PLAYER SELECT, INPUT and ENTER buttons and the JOG dial do not work. · You cannot use the G-Fade Play function when connected to the CD player CDP-CX153. Using a Sony Receiver With the On-Screen Display Control Function If you have a Sony receiver (amplifier) with the onscreen display control function, you can control the player using the remote supplied with the receiver (amplifier). 1 Playing Using a Timer You can start playing a disc at any time you want by connecting a timer (not supplied). Please also refer to the instructions for the timer if you need help. Connect the player to the VIDEO jack on the receiver (amplifier), and register the IR code of the jack to which this player is connected as "CONTROL A1/CD2. " Click LIST on the on-screen display using the remote supplied with the receiver (amplifier). The on-screen display changes to the CD player information display. [. . . ] · AC power cord must be changed only at the qualified service shop. Not this way · Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car. · After removing a disc from the disc slot, store the disc in its case. On placement · Place the player in a location with adequate ventilation to prevent heat build-up in the player. · Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom. · Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. On cleaning · Before playing, clean the disc with a cleaning cloth. [. . . ]