User manual SONY CDP-C601ES

[. . . ] Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about an hour until the moisture evaporates. Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played. [. . . ] You can also locate a particular point in a track while playing a disc. If your CD TEXT disc is not equipped with other languages, "CAN'T SELECT" appears in the display when you press the LANGUAGE button. ⷠIf you press LANGUAGE while playing a CD TEXT disc, the current operating language appears momentarily. ⷠThe operating language you have selected remains until you turn off the power. Each time you press DISPLAY ON/OFF on the remote while playing a disc, the display turns off and on alternately. Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again. Before you start playing, when you press DISPLAY ON/OFF to turn off the display, "DISPLAY OFF" appears, and when you press the button to turn on the display, "DISPLAY ON" appears. Turn AMS ± clockwise until you find the track. When using the remote, press + repeatedly until you find the track. Turn AMS ± counterclockwise until you find the track. Note that you cannot repeat a portion extending to two tracks. While playing a disc, press A ­ B on the remote when you find the starting point (point A) to be played repeatedly. The player plays this specific portion repeatedly. The player repeats the tracks as follows: When the disc is played in Setting a new starting point You can move the repeating portion ahead by changing the starting point. 1 Press A ­ B while the player is repeating the specific portion. The player repeats between the new starting and ending points. When you want to restart from the starting point A You can have the player "shuffle" tracks and play in a random order. You can arrange the order of the tracks on a disc and create your own programme. Press PLAY MODE repeatedly until "PROGRAM" appears in the display before you start playing. Turn AMS ± until the track number you want appears in the display. Total playing time Playing order Track number being programmed The indication appears while the player is "shuffling" the tracks. [. . . ] Using these functions makes recording CDs more convenient. If you use the Auto Space function when recording, for example, a medley or symphony, the sound may be interrupted where the track number changes. It happens when the track numbers are assigned in the middle of the piece. The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording. [. . . ]