User manual SONY CDP-C625

[. . . ] The CDP-XA50ES is the model used for illustration purposes, unless otherwise mentioned. Any difference in operation is clearly indicated in the text, for example, "CDP-XA50ES only. You can also use the controls on the remote if they have the same or similar names as those on the player. The following icons are used in this manual: Indicates that you can do the task using the remote. [. . . ] Setting a new starting point You can move the repeating portion ahead by changing the starting point. 1 Press A~B while the player is repeating the specific portion. The player repeats between the new starting and ending points. When you want to restart from the starting point A Indication appears while the player is The "shuffling" the tracks. You can start Shuffle Play while playing Press PLAY MODE once (or SHUFFLE on the remote), and Shuffle Play starts from the current track. You can delete unwanted tracks during Shuffle Play (Delete Shuffle Play) Press the number button of the track you want to delete on the remote. The track number and "OFF" appear in the display, and then the track number disappears from the music calendar. If you want to restore the track, press the number button again. You can arrange the order of the tracks on a disc and create your own programme. Press PLAY MODE repeatedly until "PROGRAM" appears in the display before you start playing. Turn AMS ± until the track number you want appears in the display. Repeat Step 1 to create the programme for side B. When you record on both sides of the tape, the player pauses at the end of the programme for side A. "SIDE-A" appears while checking the programme for side A and "SIDE-B" while checking the programme for side B. You can automatically insert a blank space of 3 seconds between each track You can have the player create a programme that will fit the length of the tape. select one of the following options: · Time Edit: automatically creates a programme, keeping the original order of the disc. Just Edit: automatically arranges the track order to fit the tape length. The programme can contain up to 24 tracks (a pause inserted between tracks is counted as one track). Note that tracks whose numbers are over 24 cannot be programmed. Press EDIT/TIME FADE before you start playing as follows: · Each time you press these buttons, the display changes as shown below, with the tape length of one side following each indication. The player sets the programme of each side to a half of the total playing time of the disc. Note that you cannot select "HALF" when the disc has more than 24 tracks. [. . . ] To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. AC power cord (mains lead) must be changed only at the qualified service shop. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. To keep the disc clean, handle the disc by its edge. [. . . ]