User manual SONY CDP-C69ES

[. . . ] CDP-C69ES is the model used for illustration purposes only. Any difference in operation is clearly indicated in the text, for example, "CDP-C69ES only. " Tip Instructions in this manual describe the controls on the player. You can also use the controls on the remote if they have the same or similar names as those on the player (CDP-C69ES only). AC power cord must be changed only at the qualified service shop. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Only the disc you've selected. When you are in the Repeat Play function, the player repeats the tracks as follows: When the disc is played in The player repeats All tracks on all discs in random order. All tracks on the specific disc in random order. The tracks on the CD in the order you want them to be played (see "Programming the CD tracks" on page 11). Continuous Play (ALL DISCS) Continuous Play (1 DISC) Shuffle Play (ALL DISCS) Shuffle Play (1 DISC) Programme Play (page 11) All the tracks on all discs All the tracks on the current disc All the tracks on all discs in random order All the tracks on the current disc in random order The same programme 2 Press H. Tips · You can select the disc you want to start playing first by pressing one of the DISC 1 ­ 5 buttons. · You can specify discs during ALL DISCS Shuffle Play mode, and the tracks on the specified discs are played in a random order. Press DISC 1 ­ 5 to specify the discs after Step 1. Semi-circles appear around the specified disc numbers in the display. To cancel the selected discs, press DISC 1 ­ 5 again. To return to ALL DISCS Shuffle Play, press PLAY MODE until "ALL DISCS SHUFFLE" appears in the display. · You can select the playing mode by pressing CONTINUE, SHUFFLE, or PROGRAM on the remote (CDP-C69ES ONLY). 8 Other Operations To Do this Using the CD display You can check information about the disc using the display. In the stop mode Press TIME. Current disc number ALL DISCS DISC Stop playback Pause Select a track Press x. During play or pause, turn lAMSL clockwise (to go forward) or counterclockwise (to go backward) (or press >( to go forward) or . (to go backward) on the remote (CDP-C69ES only)). After the last step in the programme, the display shows "End" and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps. continued 11 Recording From CDs Programming the CD tracks (continued) Changing the track order You can change your programme before you start playing. To You need to Recording a CD by Specifying Tape Length (Time Edit) You can have the player create a programme that will fit the length of the tape. The player automatically creates a programme, keeping the original order of the disc. The programme can contain up to 32 steps (a pause inserted between steps is counted as one step). Note that tracks numbered over 20 cannot be programmed automatically. Erase a track Press CHECK until the track you don't want appears in the display, then press CLEAR. Erase the last track Press CLEAR. Each time you in the programme press the button, the last track will be cleared. Add tracks to the end of the programme Follow Steps 2 through 4 of the programming procedure. Change the whole Hold down CLEAR until "ALL CLr" appears in the display. programme Create a new programme completely following the programming procedure. 1 Press DISC SKIP to select the disc. 2 Press TIME EDIT repeatedly before you start playing until "EDIT" appears and "A" in the A indication flashes in the display. 3 Press m or M to specify the tape Fading In or Out You can manually fade in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. To Press FADER length. Each time you press these buttons, the display changes as shown below, with the tape length of one side following each indication. C-46 23. 00 - -. - C-54 27. 00 C-90 45. 00 C-60 30. 00 C-74 37. 00 Start play fading in During pause. [. . . ] · Do not stick paper or tape on the disc. On power sources · Before operating the player, check that the operating voltage of the player is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the player. · The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. · If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. [. . . ]