User manual SONY CDP-C735

[. . . ] _________________________ For the customers in the United States ENERGY STAR® is a U. S. As ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Turn the JOG dial until the desired disc number appears in the display. 2nd NEXT DISC ART. MIN STEP SEC *DISC-20* **** ALL 1 DISC S SHUFFLE REPEAT 1 GROUP PROGRAM 1 MULTI CD TEXT NO DELAY CD1 CD2 CD3 The track being programmed 8 To program other discs (albums)/tracks (MP3 files), do the following: To program All tracks of another disc(s) Other tracks on the same disc Other tracks on other discs All MP3 files of another album(s)* Other MP3 files on the same album* Other MP3 files on other albums* Repeat Step(s) 2 and 7 3 and 7 2, 3, and 7 4, 5, and 7 6 and 7 4, 5, 6, and 7 2 *DISC-20* **** ALL 1 DISC S SHUFFLE REPEAT 1 GROUP PROGRAM 1 MULTI CD TEXT NO DELAY CD1 CD2 CD3 3 To program a whole disc, skip this step and go to step 7. To program a whole album or an MP3 file, go to step 4. To program an audio track, turn the l AMS L dial until the desired track number appears in the display and go to step 7. 2nd NEXT DISC ART. MIN STEP SEC * To select MP3 files on another disc, be sure to perform step 2 first. 9 Press H to start Program Play. *DISC-20* **** ALL 1 DISC S SHUFFLE REPEAT 1 GROUP PROGRAM 1 MULTI CD TEXT NO DELAY CD1 CD2 CD3 Track number (continued) 19US Playing CDs To cancel Program Play Press CONTINUE. Changing the programmed order You can change your program before you start playing. To Erase a track (MP3 file) or disc (album) z z The programs remain even after Program Play ends When you press H in Program Play mode, you can play the same program again. You need to Press CHECK until the track (MP3 file) or disc (album) you don't want appears in the display, then press CLEAR. Each time you press the button, the last programmed track (MP3 file) or disc (album) will be cleared. Follow the programming procedure. The program remains until erased Even if you replace discs, the programmed disc (album) and track (MP3 file) numbers remain. Therefore, the player will play the new disc (album) and track (MP3 file) numbers. However, the programmed disc (album) and track (MP3 file) numbers that are not found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. Erase the last track (MP3 file) or disc (album) in the program z You can select the program number (PROGRAM 1, 2, or 3) by using the remote Z Press PROGRAM on the remote repeatedly until the desired program number appears in the display. Add tracks (MP3 file) or discs (albums) to the end of the program Erasing the program stored in memory Note If you select Artist Play mode (on page 29), Program Play will be canceled. 1 Press PROGRAM repeatedly in stop mode until the program number (PROGRAM 1, 2, or 3) you want to erase appears in the display. The "steps" will be erased one at a time, starting with the last step in the program. Checking the programmed order You can check your program before or after you start playing. Once you have stored Custom Files for a disc, the player automatically recalls what you have stored whenever you select the disc. Note that Custom Files are erased if you do not use the player for about one month. Labeling Discs (Disc Name) You can label discs using up to 20 characters and have the player display the Disc Name each time you select the disc. The Disc Name can be anything you like, such as a title, musician's name, category, or date of purchase. You can also label the discs in the second player. z You can store this information: When you use Disc Name (page 23) Artist File (page 27) When you select a CD TEXT disc The disc title is automatically stored as the Disc Name. If the disc title has more than 20 characters, only the first 20 characters of the disc title are stored (see page 13). When you replace a disc with a CD TEXT disc, the disc title of the CD TEXT disc is also stored automatically. Note that you cannot change the Disc Name of a CD TEXT disc. You can Label discs using up to 20 characters Classify discs according to an artist name z You can label discs while the front cover is open Where are Custom Files stored? Custom Files are stored not on the disc, but in the player's memory. Therefore you cannot use Custom Files when you play the disc on other players. Labeling discs on the player MENU/NO YES JOG If you replace discs with Custom Files The Custom File information you have stored remains, since the Custom File information is assigned to each slot. Erase all the Custom Files (Disc Name and Artist File) of the old disc, and then file the new disc information in the Custom Files. CLEAR l AMS L 1 Erasing all Custom Files of all discs 1 2 3 4 Press MENU/NO. Turn the JOG dial until "ALL ERASE ?" appears. "ALL ERASE" appears in the display, and all Custom Files are erased. Turn the JOG dial until the disc number to which you want to assign a Disc Name appears in the display. [. . . ] , Moisture has condensed inside the player. Remove the disc and leave the player turned on for about an hour (see page 34). , Remove obstacles in the path of the remote and the player. , Point the remote at the remote sensor on the player. [. . . ]