User manual SONY CDX-3000

[. . . ] If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. If no sound comes from the speakers of 2-speaker systems, set the fader control to the centre position. Before playing, clean the discs with an optional cleaning cloth. [. . . ] During playback, press and hold either side of the SEEK/AMS/MANU button for more than two seconds. Release the button when you have found the desired part. When the last track on the CD is over, The track number indication will return to "1", and playback will continue from the first track of the CD. Note To play a 8 cm CD, use the optional Sony compact disc single adapter (CSA-8). If you reverse to the beginning of the disc, "_ _ " appears on the display. forwarding to the end of the disc causes " _ _" to be displayed. In either case, you can neither proceed to the previous nor the following track. Playback stops also when you select another source (radio) by pressing the FM MW/LW button. The first 10 seconds of all the tracks are played. When you find the desired track, press the button once more. Note If you leave the ejected disc in the disc insertion slot after you have pressed the 6 button, the disc will automatically retract into the unit after about 15 seconds in order to protect it. When the currently played track is over, it will be played again from the beginning. Press either side of the SEEK/AMS/MANU button once to search for the next station (automatic tuning). Press either side of the SEEK/AMS/MANU button repeatedly until the desired station is received. When an FM stereo programme with sufficient signal strength is tuned in, To keep the automatic tuning from stopping on stations too frequently (local seek mode), press SENS button momentarily to get the "LOCAL" the indication. Only the stations with relatively strong signals will be tuned in. Release the button when the desired station is received. Tune in the station which you wish to store on a preset number button. Press and hold the desired preset number button ( 1 to 6 ) for about two seconds until you hear a beep tone. When tuning in during driving, use automatic tuning. The number of the pressed preset number button appears in the display window. Up to 6 stations on each band (FMI, FMII, FMIII, MW and LW) can be stored on the preset number buttons in the order of your choice. [. . . ] The unit is installed at an angle of more than 20°. The unit is not installed in a sturdy part of the car. The following indications will flash for about five seconds. display Cause CD is dirty or inserted upside down. [. . . ]