User manual SONY CDX-4100RDS

[. . . ] Detachable-front panel enables you to take the front panel away with you when you leave your car (page 4). â· Caution alarm will be activated if you turn off the ignition key without removing the front panel from the unit. Built-in power amplifier enables you to enjoy 4-speaker systems (max. Line outputs for connecting an optional power amplifier. [. . . ] Depending on reception conditions however, it may happen that RDS stations are stored. â· When storing only RDS stations (page 10), step 3 is not necessary. When tuning in during driving, use automatic tuning or the preset search function (page 9) instead of manual tuning. This function selects from the currently selected band the stations with the strongest signals and memorises them in the order of their band frequency. Tune in the station which you wish to store on a preset number button. Press and hold the desired preset number button ( 1 to 6 ) for about two seconds until you hear a beep tone. The number of the pressed preset number button appears in the display window. Up to 6 stations on each band (FM1, FM2, FM3, MW and LW) can be stored on the preset number buttons in the order of your choice. Therefore, 18 stations can be memorised on FM. If you try to store another station on the same preset number button, the previously stored station will be erased. Press the SENS button for more than two seconds. â· When there is no preset number indicated in the display window, stations will be stored on all preset number buttons on the currently selected band. â· When there is a preset number indicated in the display window, the unit will store stations on all preset number buttons from the one currently displayed. For example, when you select FM1 and preset number 3 is displayed, the operation will start from preset number 3 on FM1, and will stop at preset number 6 on FM3. Press momentarily the preset number button ( 1 to 6 ) on which the desired station is stored. Note If you press the preset number button for more than two seconds, the currently received station will be memorised. To receive the previously memorised station, make sure that the preset number button is pressed only momentarily. Press either side of the PRESET button momentarily to receive other stations stored in the memory (Preset Search Function). Receiving RDS data with your car stereo unit allows it to use a variety of services. There are several ways to use these services. For instance, you can receive information such as traffic announcements and station names, or you can cause the unit to automatically retune to the strongest signal that is broadcasting the same programme. So even if you travel a long distance, it is still possible to listen to the same programme without having to retune manually again and again. [. . . ] You can choose the colour between amber and green. When replacing the fuse, be sure to use one with the correct amperage stated on the fuse case. Never use a fuse whose an amperage rating exceeds the one supplied with the unit as this could cause a malfunction of the unit. Warning Use a fuse with the specified amperage. [. . . ]