User manual SONY CDX-4160RDS

[. . . ] This unit lets you enjoy a variety of features by using an optional rotary remote. Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. [. . . ] Press (SEEK/AMS) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI SEEK" appears and no sound is heard). If the unit cannot find another frequency, "NO PI" appears, and the unit returns to the originally selected frequency. Note The "*" indication means that an RDS station is being received. Each time you press (DSPL), the item changes as follows: Note "NO NAME" appears if the station received does not transmit RDS data. The "REG" (regional on) function of this unit lets you stay tuned to a regional programme without being switched to another regional station. (Note that you must turn the AF function on. ) The unit is factory preset to "REG, " but if you want to turn off the function, do the following. Press (AF/TA) for more than two seconds until "REG" disappears. Note that turning the "REG" function off might cause the unit to switch to another regional station within the same network. Note This function does not work in the United Kingdom and in some other areas. If you press (AF/TA) while tuning in the traffic announcement, the unit can play a CD. If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. notes · "NO TP" flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts traffic announcements. When "EON" appears with "TP" in the display, the current station makes use of traffic announcements broadcast by other stations in the same network. To cancel all traffic announcements, turn off the function by pressing (AF/TA) until "AF" and "TA" disappear. The Local Link function lets you select other local stations in the area, even though they are not stored on your number buttons. You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. Within five seconds, press the number button of the local station again. Repeat this procedure until the desired local station is received. [. . . ] You can emphasize and adjust the bass sound easily with the D-BASS dial. This effect is similar to the one you get when you use an optional subwoofer system. Moreover, the Digital D-bass* function creates even sharper and more powerful bass sound than Analog D-bass. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. [. . . ]