User manual SONY CDX-4170R

[. . . ] This unit lets you enjoy a variety of features by using an optional rotary commander (RM-X4S). ¢ Reset button (located on the front side of the unit hidden by the front panel) 5 !Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Be sure not to drop the panel when detaching it from the unit. [. . . ] ) The unit is factory preset to "REG, " but if you want to turn off the function, do the following. Press (AF/TA) for more than two seconds until "REG" disappears. Note that turning the "REG" function off might cause the unit to switch to another regional station within the same network. Note This function does not work in the United Kingdom and in some other areas. The unit starts searching for an alternative station with a stronger signal in the same network. The Local Link function lets you select other local stations in the area, even though they are not stored on your number buttons. Note When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF/TA) repeatedly until "AF TA" disappears. Each time you press (AF/TA), the item changes as follows: " AF " TA Blank " * Select this to turn on both the AF and TA functions. Within five seconds, press the number button of the local station again. Repeat this procedure until the desired local station is received. The Traffic Announcement (TA) and Traffic Programme (TP) data let you automatically tune in an FM station that is broadcasting traffic announcements even though you are listening to other programme sources. "TP" appears in the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, "TA" flashes. "TA" stops flashing when the traffic announcement is over. tips · If you press (AF/TA) while tuning in the traffic announcement, the unit can play a CD. If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. notes · "NO TP" flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts traffic announcements. When "EON" appears with "TP" in the display, the current station makes use of traffic announcements broadcast by other stations in the same network. You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. If an emergency announcement comes in while you are listening to the radio, the programme will be automatically switched to the announcement. [. . . ] If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. Several labels are supplied with the rotary commander. [. . . ]