User manual SONY CDX-A250

[. . . ] Before detaching the front panel, be sure to press (OFF) to turn off the unit. Then press (RELEASE), slide the front panel a little to the left, and pull it off toward you. Align parts A and B, and push the front panel until it clicks. [. . . ] With the TOP making up con la marca TOP hacia arriba ±a TOP TM ±¥¬§W°C Bend these claws, if necessary. First attach 2 to the unit, then insert the unit into 1. You may not be able to install this unit in some makes of Japanese cars. With nippers or similar, cut off the claws on both side of the unit. 5 × 8 mm Bracket Soporte §¨[ Existing parts supplied to your car Piezas existentes suministradas con su automóvil ¶w ÀÆ. Existing parts supplied to your car Piezas existentes suministradas con su automóvil ¶w ÀÆ. The numbers in the list are keyed to those in the instructions. The release key 6 is used for dismounting the unit. When the installation and connections are complete, be sure to press the reset button with a ballpoint pen etc. To power antenna control lead or power supply lead of antenna booster amplifier <Note> In case of without power antenna, or antenna booster, not necessary to connect this lead. To the +12 V power terminal which is energized in the accessory position of the ignition key switch Be sure to connect the black earth lead to it first. To the +12 V power terminal which is energized at all times Be sure to connect the black earth lead to it first. To a metal point of the car First connect the black earth lead, then connect the yellow and red power input leads. The AMP/ANT REM lead (blue/white) supplies +12 V DC when you turn on the unit. When the AMP/ANT REM lead is connected to the power antenna, the antenna will be extended as long as the unit is turned on. A power antenna without relay box cannot be used with this unit. [. . . ] A power antenna without relay box cannot be used with this unit. Memory hold connection When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition key is turned off. notes on speaker connection · Before connecting the speakers, turn the unit off. [. . . ]