User manual SONY CDX-C410

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] To return to the normal radio reception, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Each source can store the bass and treble level respectively. Each time you press (DSPL), the item changes as follows: Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. Adjust within three seconds after selecting. (After three seconds, the buttons work as volume control buttons. Note Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. LOUD (Loudness) to enjoy bass and treble even at low volume. -- Select "NORM" to use the rotary remote as the factory preset position. You can control up to 10 CD changers and MD changers with this unit. When a CD or MD changer is connected, all the tracks play from the beginning. Each time you press (DSPL) during CD/MD playback, the item changes as follows: Each time you press (2) (SET UP), the item changes as follows: When the mode setting is complete, the normal playback mode appears. *1 If there is no prerecorded name for an MD, "NO NAME" appears in the display for about one second. *2 If the track name is not prerecorded, "NO NAME" appears in the display for one second. *3 If the dual information is on , clock does not appear in the display. Tip If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (1) (N). The Auto Scroll function automatically scrolls the disc or track name of the MD when you press (DSPL) and the title length exceeds eight characters. Press (SHIFT), then press (2) (SET UP) repeatedly until "A. Press (DSPL) for two seconds during MD playback. The recording date of the track is displayed for about three seconds. During playback, press either side of (SEEK/AMS) once for each track you want to skip. [. . . ] On a rainy day or in a very damp area, moisture may condense on the lenses inside the CD player. Should this occur, the unit will not operate properly. In this case, remove the disc and wait for about an hour until the moisture evaporates. Use the optional Sony compact disc single adapter (CSA-8) to protect the CD player from being damaged. [. . . ]