User manual SONY CDX-C560RDS

[. . . ] This unit lets you enjoy a variety of features by using either an optional rotary remote or an optional wireless remote. In addition to the CD playback and the radio operations, you can expand your system by connecting an optional CD/MD changer. Playing tracks in random order -- Shuffle Play . Before operating the unit for the first time or after replacing the car battery, you must reset the unit. [. . . ] When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. Press (SHIFT), then press (3) (PLAY MODE) repeatedly until "BTM" appears. To cancel all traffic announcements, turn off the function by pressing (AF/TA) until "AF. You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. Presetting different settings for each preset station Press the desired number button until "MEM" appears. Repeat from step 1 to preset other stations. Tip If you want to change the AF and/or TA setting after you tuned in the preset station, you can do so by turning the AF or TA function on or off. Note You cannot use this function in some countries where no PTY (Programme Type selection) data is available. Press (PTY/LIST) during FM reception until "PTY" appears. You can locate the station you want by selecting one of the programme types shown below. Note If the countries or regions where EON data is not transmitted, you can use this function only for the stations you have tuned in before. "- - - -" appears if the received station is not an RDS station, or if the RDS data has not been received. The programme types appear in the order shown in the above table. When the unit finds the programme, the programme type appears again for five seconds. "NO" and the programme type appear alternately for five seconds if the unit cannot find the programme type. Each source can store the bass and treble levels independantly. Press (SHIFT), then press (2) (SET UP) repeatedly until "CT" appears. The CT function may not work even though an RDS station is being received. There might be a difference between the time set by the CT function and the actual time. Adjust within three seconds after selecting. [. . . ] When the POWER SELECT switch is set to the B position, the unit cannot be operated with the wireless remote unless (SOURCE) on the unit is pressed or a CD is inserted to activate the unit first. Outputs Line outputs (2) Power aerial relay control lead Power amplifier control lead Telephone mute control lead Illumination control lead Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative ground) Approx. 3 kg Parts for installation and connections (1 set) Front panel case (1) Rotary remote RM-X2S Wireless remote RM-X41 BUS cable (supplied with an RCA pin cord) RC-61 (1 m), RC-62 (2 m) RCA pin cord RC-63 (1 m), RC-64 (2 m), RC-65 (5 m) Cleaning cloth XP-CD1 Compact disc single adapter CSA-8 CD changer CDX-705 (10 discs), CDX-T65 (6 discs), CDX-T62 (6 discs) MD changer MDX-60, MDX-61 Source selector XA-C30 Design and specifications are subject to change without notice. The following checklist will help you remedy problems you may encounter with your unit. [. . . ]