User manual SONY CDX-C5750

[. . . ] 3-865-686-11 (1) FM/AM Compact Disc Player Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. CDX-C5750/C4750 Serial No. For installation and connections, see the supplied installation/connections manual. CDX-C5750 CDX-C4750 © 1999 by Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ·RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander. -- Select "NORM" to use the rotary commander as the factory-set position. -- Select "REV" when you mount the rotary commander on the right side of the steering column. ·M. DSPL (Motion Display) - to turn the motion display on or off. ·A. SCRL (Auto Scroll) (page 7, 16). (CDX-C5750 only) Note If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled. 1 2 Press (SHIFT). Press (2) (SET UP) repeatedly until the desired item appears. Each time you press (2) (SET UP), the item changes as follows: CLOCK n D. INFO* n AMBER/GREEN n DIM n BEEP n RM n M. DSPL n A. SCRL* * When no CD or MD is playing, this item will not appear. Note The displayed item will differ depending on the source. 3 4 Press (4) (n) to select the desired setting (Example: ON or OFF). After the mode setting is complete, the display returns to normal playback mode. 14 Boosting the bass sound -- D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. Level D-BASS 3 D-BASS 2 D-BASS 1 With Optional Equipment CD/MD Unit This unit can control a maximum of seven external CD/MD units in this configuration: CD unit - maximum of five MD unit - maximum of five. CDX-C5750 only: If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. 0dB Frequency (Hz) Playing a CD or MD 1 2 Press (SOURCE) repeatedly to select CD or MD. Press (MODE) until the desired unit appears. CD/MD playback starts. Adjusting the bass curve Turn the D-BASS control to adjust the bass level (1, 2 or 3). "D-BASS" appears in the display. To cancel, turn the control to OFF. Note If the bass sound becomes distorted, adjust the DBASS control or volume. When a CD/MD unit is connected, all the tracks play from the beginning. Changing the display item CDX-C5750: Each time you press (DSPL) during CD, CD TEXT disc, or MD playback, the item changes as follows: $ Track number/ Elapsed playback time $ Disc name*1/Artist name*2 $ Track name*3 $ Clock *1 If you have not labeled the disc or if there is no disc name prerecorded on the MD, "NO NAME" appears in the display. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) *3 If the track name of a CD TEXT disc or MD is not prerecorded, "NO NAME" appears in the display. continue to next page n 15 You can label CD and CD TEXT discs with a personalized name using the disc memo function. Refer to "Labeling a CD" (page 17). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed. Tip If you want to display the original CD TEXT information after labeling the CD TEXT disc with a personalized name, press (SHIFT), then (4) (n). If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. 1 2 3 4 During playback, press (SHIFT). [. . . ] n Store again into the memory. The contents of the memory have been erased. Indications do not appear in the Remove the front panel and clean the connectors. "Cleaning the connectors" (page 23) for details. ·An optional power amplifier is connected and you are not using the built-in amplifier. ·The beep sound is canceled (page 14). CD/MD playback Problem A disc cannot be loaded. [. . . ]