User manual SONY CDX-C610RDS

[. . . ] This unit lets you enjoy a variety of features by using either a rotary remote or a wireless remote. In addition to the CD playback and the radio operations, you can expand your system by connecting an optional CD/MD changer. Playing tracks in random order -- Shuffle Play . Before operating the unit for the first time or after replacing the car battery, you must reset the unit. [. . . ] You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. Presetting different settings for each preset station Press the desired number button for two seconds until a beep sounds. Repeat from step 1 for presetting other stations. If an emergency announcement comes in while you are listening to the radio, the programme will be automatically switched to the announcement. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter what you are listening to at the time. Tip If you want to change the preset AF and/or TA setting after you tuned in the preset station, you can do so by turning on/off the AF or TA function. You can locate the station you want by selecting one of the programme types shown below. Note If the countries or regions where EON data is not transmitted, you can use this function only for the stations you have tuned in once. When the unit finds the programme, the programme type appears again for five seconds. "NO" and the programme type appear alternately for five seconds if the unit cannot find the programme type. Press (SHIFT), then press (2) (SET UP) repeatedly until "CT" appears. Note You can not use this function in some countries where no PTY (Programme Type selection) data is available. The CT function may not work even though an RDS station is being received. â· There might be a difference between the time set by the CT function and the actual time. Press (LIST) during FM reception until "PTY" appears. "- - - - -" appears if the received station is not an RDS station, or if the RDS data has not been received. The programme types appear in the order shown in the above table. You can control the optional CD or MD changer with the rotary remote. Every time you press (SOURCE), the source changes as follows: FM1 n FM2 n MW n LW n CD1 n CD2 n MD1 n MD2 Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary remote. Rotate and hold the control to locate the specific point in a track, then release it to start playback. [. . . ] TM Reset button (located on the front side of the unit hidden by the front panel) 4 !The buttons of the wireless remote work the same functions as those on this unit. 1 OFF button 2 DIR button (DIR) does not work with this unit. 3 SOURCE button 4 SEEK/AMS button 5 PRESET/DISC button You cannot do the manual search and manual tuning with the remote. [. . . ]