User manual SONY CDX-C6600

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This unit lets you enjoy a variety of features by using an optional rotary commander. [. . . ] Each time you press (DSPL), the item changes as follows: After if you select the desired item, the display will be automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. 3 Repeat steps 1 and 2 to enter the entire name. To return to the normal radio reception, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Each time you press (DSPL), the item changes as follows: Note Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. Each time you press (SOURCE), the source changes as follows: You can connect an optional rotary commander (RM-X4S) with this unit. TUNER n CD n MD* n TV* * If the corresponding optional equipment is not connected, this item will not appear. Pressing (MODE) changes the operation in the following ways; Depending on how you mount the rotary commander, attach the appropriate labell as shown in the illustration below. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. Using the rotary commander the rotary commander works by pressing buttons and/or rotating controls. You can control the optional CD or MD changer with the rotary commander. You can store the bass and treble levels independently for each source. Adjust within three seconds after selecting the item. If you need to mount the rotary commander on the right side of the steering column, you can reverse the controls operative direction. Tip The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). Press (SOUND) two seconds while pushing the VOL control. Tip You can control the operative direction of controls with the unit (page 13). -- Select "NORM" to use the rotary commander in the factory preset position. [. . . ] Back of the front panel Notes · For safety, turn off the engine before cleaning the connectors and remove the key from the ignition switch. ⷠNever touch the connectors directly with your fingers or with any metal device. POWER OUTPUT AND TOTAL HARMONIC DISTORTION 17 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1 % total harmonic distortion. Other specifications CD player section System Signal-to-noise ratio Frequency response Wow and flutter Laser Diode Properties Material Wavelength Emission Duration Laser output power Compact disc digital audio system 90 dB 10 ­ 20, 000 Hz Below measurable limit GaAlAs 780 nm Continuous Less than 44. [. . . ]