User manual SONY CDX-C710

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired part. To go back to the normal playback mode, select "REP-OFF" in step 2 above. To search forward To search backward Playing tracks in random order -- Shuffle Play Press the number button that corresponds with the desired disc number. During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "SHUF" appears. You can play the first 10 seconds of all the tracks on the currently selected disc. During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "INTRO" appears. To go back to the normal playback mode, select "SHUF-OFF" in step 2 above. To go back to the normal playback mode, select "INTRO-OFF" in step 2 above. You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate a disc by name and select the specific tracks for playback (page 15). Each time you press (DSPL) during CD playback, the item changes as follows: Play the CD and press (LIST) for two seconds. Repeat steps 4 and 5 if you want to erase other names. If you want to put a blank space between characters, select "_" (underbar). You can use this function for the discs that have been assigned a custom name. For more information on disc names, refer to "Labeling a CD. 3 Repeat steps 1 and 2 to enter the entire name. To return to the normal CD playback mode, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Once a disc name has been displayed for five seconds, the display goes back to its normal playback mode. The track names are not displayed during MD playback. [. . . ] When the POWER SELECT switch is set to the B position, the unit cannot be operated with the wireless remote unless (SOURCE) on the unit is pressed or a CD is inserted to activate the unit first. POWER OUTPUT AND TOTAL HARMONIC DISTORTION 15 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1 % total harmonic distortion. Other specifications CD player section System Signal-to-noise ratio Frequency response Wow and flutter Laser Diode Properties Material Wavelength Emission Duration Laser output power Compact disc digital audio system 90 dB 10 ­ 20, 000 Hz Below measurable limit GaAlAs 780 nm Continuous Less than 44. Output lead Power antenna relay control lead Power amplifier control lead Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative ground) Approx. [. . . ]