User manual SONY CDX-C760

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] If a track stored into the program memory is not in the disc magazine, the track will be skipped. ⷠWhen the disc magazine contains no tracks stored into the program memory, or when the program information has not been loaded yet, "Not Ready" appears. When you finish entering tracks, press (3) (PLAY MODE) for two seconds. Press (SHIFT), then press (3) (PLAY MODE) for two seconds. The current track in that slot number and the succeeding tracks shift down. To continue inserting tracks, repeat steps 2 through 4. When you finish inserting tracks, press (3) (PLAY MODE) for two seconds. Press (SHIFT), then press (3) (PLAY MODE) for two seconds. When you finish erasing programs, press (3) (PLAY MODE) for two seconds. Press (SHIFT), then press (3) (PLAY MODE) for two seconds. Track slot number When you erase a track from a slot number, the succeeding tracks shift up to fill the gap. Press (1) (N) or (4) (n) to select the track slot number where you want to insert a track. Track slot number When you finish erasing tracks, press (3) (PLAY MODE) for two seconds. Press either side of (SEEK/AMS) to select the track you want to insert. You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 20) and select the specific tracks for playback (page 21). When you play back a CD-TEXT disc, you can set the priority display item to be the disc memo name or the CD-TEXT name. After the mode setting is complete, the display goes back to normal playback mode. Play the CD and press (LIST) for two seconds. If you want to change to the other setting, you can do so in step 3. If you want to put a blank space between characters, select "_" (underbar). [. . . ] You cannot do manual search and manual tuning with the remote. When the POWER SELECT switch is set to the B position, the unit cannot be operated with the wireless remote unless (SOURCE) on the unit is pressed or a CD is inserted to activate the unit first. POWER OUTPUT AND TOTAL HARMONIC DISTORTION 17 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1 % total harmonic distortion. Other specifications CD player section System Signal-to-noise ratio Frequency response Wow and flutter Laser Diode Properties Material Wavelength Emission Duration Laser output power Compact disc digital audio system 99 dB 10 ­ 20, 000 Hz Below measurable limit GaAlAs 780 nm Continuous Less than 44. [. . . ]