User manual SONY CDX-C780

[. . . ] FM/AM Compact Disc Player Operating Instructions EN Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. CDX-C780 Serial No. For installation and connections, see the supplied installation/connections manual. CDX-C780 © 1998 by Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When the frequency setting is complete, the display goes back to the normal playback mode. 18 With Optional Equipment CD/MD Unit You can control up to 7 CD and MD units with this unit. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play back a CD TEXT disc. You can label CD and CD TEXT discs with a personalized name using the disc memo function, refer to "Labeling a CD" (page 23). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed. Tips · If the name of the MD or CD TEXT disc is too long, you can scroll it across the display by pressing (SHIFT), then (2) (N). · If you want to display the original CD TEXT information after labeling the CD TEXT disc with a personalized name, press (SHIFT) , then (5) (n). Playing a CD or MD 1 2 Press (SOURCE) repeatedly to select the CD or MD. Press (MODE) until the desired unit appears. CD/MD playback starts. Automatically scrolling a disc name -- Auto Scroll If the disc name/artist name or track name on a CD TEXT disc or MD exceeds 10 characters and the Auto Scroll function is on, automatically scrolls on the display as follows: · The disc name appears when the disc has changed (if the disc name is selected). · The track name appears when the track has changed (if the track name is selected). When a CD/MD unit is connected, all the tracks play from the beginning. EN Other Functions/CD/MD Unit Changing the displayed item Each time you press (DSPL) during CD, CD TEXT or MD playback, the item changes as follows: $ Elapsed playback time $ Disc name*1/Artist name*2 $ Track name*3 $ Clock $ MOTION DISPLAY*4 If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. 1 2 3 4 During playback, press (SHIFT). Press (3) (SET UP) repeatedly until "A. Scrl" appears. Press (5) (n) to select "A. Scrl on. " Press (SHIFT) To cancel Auto Scroll, select "A. Scrl off" in step 2 above. Note For some CD TEXT discs with extremely many characters, the following cases may happen: -- Some of the characters are not displayed. -- Auto Scroll does not work. *1 If you have not labeled the disc or there is no disc name prerecorded on the MD, "NO D. Name" appears in the display. If you play a CD TEXT disc, the artist *2 name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) *3 If the track name of a CD TEXT disc or MD is not prerecorded, "NO T. Name" appears in the display. *4 AII the items above are scrolled in the display one by one in order. 19 Locating a specific track -- Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down once for each track you want to skip. To locate succeeding tracks To locate preceding tracks Playing tracks repeatedly -- Repeat Play You can select: ·Repeat 1 to repeat a track. ·Repeat 2 to repeat a disc. 1 2 During playback, press (SHIFT). Press (7) (REP) repeatedly until the desired setting appears. z Repeat 1 z Repeat 2 Repeat off Z Locating a specific point in a track -- Manual Search During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point. To search forward To search backward Repeat Play starts. 3 Press (SHIFT). To go back to normal playback mode, select "Repeat off" in step 2 above. EN Locating a disc by disc number -- Direct Disc Selection Press the number button that corresponds with the desired disc number. The desired disc in the current unit begins playback. Playing tracks in random order -- Shuffle Play You can select: ·Shuf 1 to play the tracks on the current disc in random order. ·Shuf All to play all the tracks in random order. Scanning the tracks -- Intro Scan You can play the first 10 seconds of all the tracks on the current disc. 1 2 During playback, press (SHIFT). Press (8) (SHUF) repeatedly until the desired setting appears. z Shuf 1 z Shuf All Shuf off Z 1 2 3 During playback, press (SHIFT), then press (4) (PLAY MODE) repeatedly until "Intro" appears. Press (5) (n) to select "Intro on. " Intro Scan starts. Press (SHIFT). Shuffle Play starts. 3 Press (SHIFT). To go back to normal playback mode, select "Shuf off" in step 2 above. To go back to normal playback mode, select "Intro off" in step 2 above. 20 Creating a program -- Program Memory (CD/MD unit with the program memory function) You can play tracks in the order you want by making your own program. You can make two programs: Program 1 and Program 2. [. . . ] the connectors" (page 34) for details. CD/MD playback Problem A disc cannot be loaded. Cause/Solution ·Another CD is already loaded. ·The CD is forcibly inserted upside down or in the wrong way (MD). The ambient temperature exceeds 50°C (122°F). [. . . ]