User manual SONY CDX-C7850R

[. . . ] Thank you for purchasing this Sony Compact Disc Player. This unit lets you enjoy a variety of features as well as either a supplied rotary commander or an optional wireless remote. In addition to the CD playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc*2. [. . . ] Press (SHIFT), then press (3) (SET UP) repeatedly until "CT" appears. The programme types appear in the order shown in the above table. When the unit finds the programme, the programme type appears again for five seconds. "NO" and the programme type appear alternately for five seconds if the unit cannot find the programme type. The CT function may not work even though an RDS station is being received. There might be a difference between the time set by the CT function and the actual time. You can also control an optional CD or MD unit with the rotary commander. Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. Depending on how you mount the rotary commander, attach appropriate the labels as shown as shown in the illustration below. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. Using the rotary commander Each time you press (SOURCE), the source changes as follows: TUNER n CD n MD* * If the corresponding optional equipment is not connected, this item will not appear. Pressing (MODE) changes the operation in the following ways; You can adjust the equalizer curve, listening position, cut-off frequency, bass, treble, balance and fader. You can store the bass and treble levels independently for each source. * If the corresponding optional equipment is not connected, this item will not appear. Adjust within three seconds after selecting the item. Tip The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). If you need to mount the rotary commander on the righthand side of the steering column, you can reverse the operative direction. Press (SOUND) for two seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (see "Changing the sound and display settings" on page 23). The following items can be set: · -- Select "Auto" to dim the display only when you turn the interior lights on. Contrast ­ to adjust the contrast if the indications in the display are not recognisable because of the unit's installed position. Beep ­ to turn the beep sounds on or off. [. . . ] Never touch the connectors directly with your fingers or any metal device. Outputs Line outputs (3) Power aerial relay control lead Power amplifier control lead Telephone ATT control lead Illumination control lead Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative ground) Approx. 4 kg Rotary commander (1) Parts for installation and connections (1 set) Front panel case (1) Wireless remote RM-X47 BUS cable (supplied with an RCA pin cord) RC-61 (1 m), RC-62 (2 m) Compact disc single adapter CSA-8 CD changer (10 discs) CDX-828, CDX-727 MD changer MDX-65 Other CD/MD changers with the Sony-BUS system Digital equalizer preamplifier XDP-210EQ Source selector XA-C30 Design and specifications are subject to change without notice. The following checklist will help you remedy the problems you may encounter with your unit. [. . . ]