User manual SONY CDX-C810DSP

[. . . ] This unit lets you enjoy a variety of features by using either a rotary remote or a wireless remote. In addition to the CD playback and the radio operations, you can expand your system by connecting an optional CD/MD changer. Playing tracks in random order -- Shuffle Play . Listening to each programme source in its registered surround mode -- Source Sound Memory . [. . . ] The programme types appear in the order shown in the above table. You can select a desired surround mode to best fit the audio source. The following modes can simulate different sound fields and enhance the sound so that you can feel as if you are in a live concert. After three seconds, the display goes back to the normal playback mode. After three seconds, the display goes back to the normal playback mode. The CDX-C810DSP has a built-in DSP IC that uses digital processing to create clearer adjustments to the bass and treble volume than analog circuits. The sharper tone slopes used in this unit produce more obvious and effective tone responses. For example, you can enhance the background music with the bass volume and effectively isolate the main vocals. To match the characteristics of the connected subwoofer(s), you can cut the unwanted high and middle frequency signals entering the subwoofer(s). By setting the cut-off frequency (see the diagram below), the subwoofer(s) will output only low frequency signals so that you can get a clearer sound image. After three seconds, the display goes back to the normal playback mode. You can control the optional CD or MD changer with the rotary remote. Listening to each programme source in its registered surround mode eN -- Source Sound Memory You can listen to the same source always in the surround menu and the sound characteristics (bass, treble and subwoofer) even after changing the programme source or turning the unit on and off again. Every time you press (SOURCE), the source changes as follows: FM1 n FM2 n MW n LW (SW) n CD1 n CD2 n MD1 n MD2 Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary remote. Rotate and hold the control to locate the specific point in a track, then release it to start playback. If you need to mount the rotary remote on the right of the steering column, you can reverse the operative direction of the controls. Press (DSPL) for two seconds while pushing the VOL control. Tip You can control the operative direction of controls with the unit (page 18). Each source can store the bass and treble level respectively. * The level of the SUB output cannot be adjusted. Adjust within three seconds after selecting. (After three seconds, the buttons work as volume control buttons. [. . . ] TM Reset button (located on the front side of the unit hidden by the front panel) 4 !The buttons of the wireless remote work the same functions as those on this unit. 1 OFF button 2 DIR button (DIR) does not work with this unit. 3 SOURCE button 4 SEEK/AMS button 5 PRESET/DISC button You cannot do the manual search and manual tuning with the remote. [. . . ]