User manual SONY CDX-C880R

[. . . ] This unit lets you enjoy a variety of features by using either a supplied rotary commander or an optional wireless remote. In addition to the CD playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play back a CD TEXT disc*2. Sony has developed a new function which contributes to safer driving. [. . . ] " In this case, repeat the same registered phrase. Press (REC) on the rotary commander and voice your memorandum towards the supplied microphone. When the unit fails to recognise the phrase three times, a beep sounds and the unit returns to the previous source. In this case, repeat the same process starting from step 1. If it is noisy outside the car, the unit may not recognise the registered phrase. In this case, close the window and try again. If you are far from the microphone, speak louder or come nearer to the microphone. The recording is completed by pressing (REC) again or leaving the unit untouched for 15 seconds. If you do not reply within three seconds after the vocalised instruction, the unit replies "Please speak now. " · When you are requesting a registered source, pronounce clearly and loudly to make it easier for the unit to recognise. When the unit has difficulty recognising the phrase, register the vocal phrase again. The voice memos are recorded as "MEMO 1", "MEMO 2", etc. When a beep sounds and "MEMO FULL" appears, it means there is no room for additional voice memos. In such a case, erase the older recorded voice memos before recording new ones. Playing back the voice memo Using the rotary commander the rotary commander works by pressing buttons and/or rotating controls. You can control an optional CD or MD unit with the rotary commander. Select the desired voice memo using the SEEK/AMS control. Adjust the volume on the main unit or by using the rotary commander. The unit automatically returns to the previous source after playing back all of the voice memos. Playback stops and the unit automatically returns to the previous source. Each time you press (SOURCE), the source changes as follows: Play back the voice memo to be erased. Press and hold (PLAY) on the rotary commander until a beep sound is heard. [. . . ] The unit is installed at an angle of more than 60°. The unit is not installed in a sturdy part of the car. The station does not broadcast any traffic announcements despite being TP. Problem Registering a vocal phrase or recording a voice memo is not possible. [. . . ]