User manual SONY CDX-C90R

[. . . ] Thank you for purchasing this Sony Compact Disc Player. This unit lets you enjoy a variety of features using either a rotary remote or a wireless remote. In addition to the CD playback and radio operations, you can expand your system by connecting an optional CD/ MD unit*. If you operate this unit or connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play back a CD TEXT disc. [. . . ] If you are listening to a source other than the radio, the unit will play the emergency announcements if you have set AF or TA to on. With this setting, the unit will automatically switch to these announcements no matter what you are listening to at the time. The unit automatically records and stores up to eight traffic announcements. The TIR function turns the unit on automatically and records traffic announcements for up to one hour before and after a preset time. notes · The unit also stands by for traffic announcements for two hours after you turn off the engine, as long as the TIR function is on. ⷠIf you have a power aerial, it automatically extends every time the unit searches for a traffic programme station. If you have a manual aerial, make sure that the aerial is fully extended. ⷠIf you do not use your car for about a week and the TIR function is on, the TIR function will turn off automatically to prevent battery wear. Tip In step 2, to move the cursor back to the previous column (one at a time), press ?Select "RDS, " then press / to move to the sub menu, then select "TIR Mode" by pressing > or . Mode TA Display TIR Mode CT off off off on Replay on off set Each time you press ENTER, the setting item changes as follows: Then press / to move to minutes and press > or . The unit will detect and record traffic programmes in the background even while you are listening to stations that do not broadcast such announcements. ⷠThe unit automatically records and stores up to eight traffic announcements (or the recording time reaches 8 minutes) and the unit will erase the oldest recording every time it records a new one. Each time you press and hold DSPL/PTY for two seconds, the function menu switches as follows: The unit turns on automatically and stands by for traffic announcements for up to one hour before and after the preset time. While listening to an FM broadcast, press and hold TIR until t appears. If the preset station does not broadcast the traffic announcement while searching, the unit starts searching for other traffic programme (TP) stations. To turn off the TIR function Press and hold TIR for two second. When there are recorded traffic announcements you have not listened to yet, t appears in reverse contrast. To listen to the previous ones, press TIR or push the SEEK/AMS control up. To set the TIR function with the wireless remote While listening to FM, press MENU and set the TIR mode in the RDS menu to "Replay, ""on, ""off, " or "set. " Indication Replay on off set Operation Plays back the recorded TA. You can locate the station you want by selecting one of the programme types. [. . . ] The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. Remove the front panel and clean the connectors. see "Cleaning the connectors" on page 80 for details. [. . . ]