User manual SONY CDX-CA400

[. . . ] The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ⷠDo not drop or put excessive pressure on the front panel and its display window. ⷠDo not subject the front panel to heat/high temperature or moisture. Avoid leaving it in parked cars or on dashboards/rear trays. Tip When carrying the front panel with you, use the supplied front panel case. In addition to playing a CD with this unit, you can also control an external CD/MD unit. Only one optional CD/MD unit can be connected. After the clock setting is completed, the display returns to normal play mode. If a disc is already inserted, press (SOURCE) repeatedly until "CD" appears to start playback. When the last track on the disc is over, playback restarts from the first track of the disc. ⷠWith an optional unit connected, playback of the same source will continue on to the optional CD/ MD unit. " Press (MODE) repeatedly until the desired unit appears. The disc in the main unit will repeat a track or the entire disc when it reaches the end. For repeat play, you can select: · * Available only when an optional CD/MD unit is connected. Tip With the optional MG Memory Stick System-up Player MGS-X1 connected to this unit, press (SOURCE) to select "MD, " then press (MODE) to select the unit number of the MD (MD1 or MD2, etc. During playback, press (3) (REP) repeatedly until the desired setting appears in the display. To return to normal play mode, press (3) (REP) repeatedly until "REP" indicator disappears. Track number/Elapsed playing time To Switch display item Press (DSPL) Playing tracks in random order -- Shuffle Play SHUF 2* -- to play the tracks in the current optional CD (MD) unit in random order. * Available only when an optional CD/MD unit is connected. During playback, press (4) (SHUF) repeatedly until the desired setting appears in the display. To return to normal play mode, press (4) (SHUF) repeatedly until "SHUF" indicator disappears. Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. [. . . ] notes · If you adjust any sound characteristics by using the (SEL) button (page 13), the MBP setting returns to OFF. ⷠWhen MBP is set to OFF, the sound setting you adjusted (page 13) is activated. When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. if the fuse blows , check the power connection and replace the fuse. [. . . ]