User manual SONY CDX-CA600X

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features even more with: · Optional controller accessories Card remote commander RM-X114 Rotary commander RM-X4S *1 This unit works with Sony products only. This label is located on the bottom of the chassis. * Functions available with optional CD/MD unit Using the rotary commander . [. . . ] Turn the VOL control dial to select the disc name you want to erase. Turn the SEEK/AMS control dial to play the disc. Repeat steps 5 and 6 if you want to erase other names. The unit returns to normal CD play mode. If you cannot find the Disc Memo you want to erase, try selecting a different CD unit in step 2. Once a disc name has been displayed for 5 seconds, the display goes back to its normal playback mode. The track names are not displayed during MD playback. If the disc information has not been read by the unit, "NOT READ" apppears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded. There are also some letters which cannot be displayed (during MD playback). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. You can manually preset the desired stations on any chosen number button. Turn the SEEK/AMS control dial to tune in the station that you want to store. Press the desired number button ((1) to (6)) until "MEM" appears. The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. The unit stores stations in the order of their frequencies on the number buttons. Note If you try to store another station on the same number button, the previously stored station will be erased. Press the number button ((1) to (6)) on which the desired station is stored. If only a few stations can be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Scanning stops when the unit receives a station. Turn the SEEK/AMS control dial until the desired station is received. [. . . ] The CD is forcibly inserted upside down or in the wrong way. You tried to playback a CD-R/CD-RW not designed for audio use. Some CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. The unit is installed at an angle of more than 60°. [. . . ]