User manual SONY CDX-DAB6650

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. [. . . ] The unit stores services on the number buttons. While receiving the service that you want to store, press and hold a number button ((1) to (6)) until a beep sounds. Note If you try to store another service on the same number button, the previous stored service will be replaced. Select a source, then press (ANNC) repeatedly until the desired DAB announcement appears. With the card remote commander · Select the band, then press a number button ((1) to (6)). With the card remote commander To select preset services, press M or m. Transport flash Warning/Service News flash Area weather flash Event announcement Special event Programme Information Sport report Financial report Select the band, then press and hold (SEEK) +/­ to search for the ensemble. Scanning stops when the unit receives an ensemble. Repeat this procedure until the desired ensemble is received. The unit starts to search for a service broadcasting the selected programme type. To keep listening to the same programme even during weak reception With the card remote commander In step 2, to select the programme type, press M or m. Note You cannot use this function in countries/regions where no PTY data is available. Other functions Changing the sound settings With the card remote commander In step 3, to adjust the selected item, press < or , . With the card remote commander In step 3, to select the setting, press < or , . After 3 seconds, the setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): "z" indicates the default settings. ­ "Auto" (z): to dim the display automatically when you turn the lights on. Note Adjust within 3 seconds of selecting the item. With the card remote commander In step 2, to adjust the selected item, press < or , . You can adjust and store the equalizer settings for different tone ranges. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. [. . . ] The power connecting lead or battery has been disconnected. ⷠThe power connecting lead is not connected properly. Stored stations and correct time are erased. Makes noise when the position of the ignition key is switched. [. . . ]