User manual SONY CDX DAB700U

[. . . ] Be sure to install this unit in the dashboard of the car for safety. This label is located on the bottom of the chassis. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. [. . . ] Note If the control dial is rotated rapidly, the color of the display and the buttons may change too quickly. If the track for which you are searching was transferred by "Content Transfer, " the most melodic or rhythmical sections of tracks are played (page 15). The color of the display and buttons on the main unit changes according to the SensMeTM channel. Rotate the control dial until "BASE COLOR" appears, then press it. You can select a preset color as a basis for further customizing. when you select "BASE COLOR , " customized color is overwritten. Rotate the control dial to select from "RGB RED, " "RGB GREEN, " or "RGB BLUE, " then press it. Rotate the control dial until "SENSME COLR" appears, then press it. Changing DAY/NIGHT color mode You can set a different color for DAY/ NIGHT depending on the DIMMER setting. OFF or AUTO (turn off the head light*2) ON or AUTO (turn on the head light*2) When you select a preset pattern or play tracks in the SensMeTM channel, sound synchronization becomes effective. *2 Available only when the illumination control lead is connected. Rotate the control dial until "SOUND SYNC" appears, then press it. You can display the menu more clearly (White) without concern for color setting. Rotate the control dial until the desired menu item appears, then press it. Rotate the control dial until "WHITE MENU" appears, then press it. When you press , the color of display and the buttons on the main unit turns white once, and then the color changes to the customized color. The following items can be set: EQ7 PRESET (page 23) EQ7 SETTING (page 23) POSITION POSITION (Listening Position setting) (page 24) ADJUST POS*1 (Listening Position adjustment) (page 24) SW POSITION*1 (Subwoofer Position) (page 24) BALANCE Adjusts the sound balance: "RIGHT-15" ­ "CENTER" ­ "LEFT-15. Rotate the control dial until "START WHITE" appears, then press it. ) AUX VOLUME*2 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. Tip The equalizer curve setting can be memorized for each source. "CUSTOM" of EQ7 allows you to make your own equalizer settings. [. . . ] INVALID The connected USB device does not contain a music file for the SensMeTM function. The unit starts searching for another frequency with the same PI (Program Identification) data ("PI SEEK" appears). NO MUSIC The disc or USB device does not contain a music file. ­ Connect a USB device with a music file in it. [. . . ]