Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY CDX-F5510. We hope that this SONY CDX-F5510 user guide will be useful to you.
Lastmanuals help download the user guide SONY CDX-F5510.
You may also download the following manuals related to this product:
SONY CDX-F5510 annexe 2 (977 ko) SONY CDX-F5510 annexe 1 (977 ko) SONY CDX-F5510 INSTALLATION/CONNECTIONS INSTRUCTIONS (308 ko)
Manual abstract: user guide SONY CDX-F5510
Detailed instructions for use are in the User's Guide.
[. . . ] Notes on the power supply lead (yellow) · When connecting this unit in combination with other stereo components, the connected car circuit's rating must be higher than the sum of each component's fuse. When no car circuits are rated high enough, connect the unit directly to the battery. [. . . ] To the power antenna control lead or power supply lead of antenna booster amplifier notes · It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-operated telescopic antenna. When your car has a built-in FM/AM antenna in the rear/ side glass, see "Notes on the control and power supply leads. The numbers in the list are keyed to those in the instructions. The bracket and the protection collar are attached to the unit before shipping. Before mounting the unit, use the release keys to remove the bracket and the protection collar from the unit. Keep the release keys for future use as they are also necessary if you remove the unit from your car. Connecting any other system may damage the unit. Be sure to connect the black ground lead to a metal surface of the car first. To the +12 V power terminal which is energized in the accessory position of the ignition key switch notes · If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black ground lead to a metal surface of the car first. When your car has a built-in FM/AM antenna in the rear/ side glass, see "Notes on the control and power supply leads. Caution Handle the bracket carefully to avoid injuring your fingers. To the +12 V power terminal which is energized at all times Be sure to connect the black ground lead to a metal surface of the car first. Note Before installing, make sure that the catches on both sides of the bracket are bent inwards 2 mm (3/32 in). [. . . ] Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY CDX-F5510
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY CDX-F5510 will begin.
SONY CDX-F5510 annexe 2 (977 ko)
