User manual SONY CDX-F5550

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. [. . . ] After 3 seconds, the setting is complete and the display returns to normal play/reception mode. *1 *2 *3 *4 When the unit is turned off. To return to normal play mode, select "REPOFF" or "SHUF-OFF. " Tip "SHUF-ALL" will not shuffle tracks between CD units and MD changers. When you play a disc in a CD changer with the CUSTOM FILE function, you can label each disc with a custom name up to 8 characters (Disc Memo). Disc number Unit number While playing a disc that you want to label, press and hold (LIST). Press the volume +/­ button repeatedly until the desired character appears. Repeat this operation until the entire name is entered. The labelling is complete and the display returns to normal play mode. Then, press again within 2 seconds and hold. To correct or erase a character, overwrite or enter " . " · The Disc Memo always takes priority over any prerecorded title. You can label a disc on the unit if a changer with the CUSTOM FILE function is connected. "REP-TRACK" and all shuffle play are suspended until the labelling is complete. With the card remote commander In step 2, to select the character, press M or m. Repeat and shuffle play 1 Select the unit that has stored the custom name you want to delete, then press and hold (LIST). Repeat steps 3 and 4 to delete other names. *1 When one or more CD/MD changers are connected. *2 When one or more CD changers, or two or more MD changers are connected. With the card remote commander In step 3, to select the name, press M or m. You can select a disc from the list when connecting a CD changer with the CUSTOM FILE function or an MD changer. After 5 seconds, the unit returns to normal play mode. [. . . ] "MS" or "MD" does not appear on the source display when both the optional MGS-X1 and MD changer are connected. this unit recognizes MGS-X1 as an MD unit. T Press (SOURCE) until "MS" or "MD" appears, then press (MODE) repeatedly. The SEEK starts after a few seconds of listening. [. . . ]