User manual SONY CDX-F5550EE

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. [. . . ] The following items can be set (follow the page reference for details): "z" indicates the default settings. To correct or erase a character, overwrite or enter " . " · The Disc Memo always takes priority over any prerecorded title. ⷠYou can label a disc on the unit if a changer with the CUSTOM FILE function is connected. ⷠ"REP-TRACK" and all shuffle play are suspended until the labelling is complete. With the card remote commander In step 2, to select the character, press M or m. ­ "AT" (z): to dim the display automatically when you turn the lights on. 1 Select the radio, or the unit that has stored the custom name you want to delete, then press and hold (LIST). Then, press again within 2 seconds and hold. Repeat and shuffle play *1 When one or more CD/MD changers are connected. *2 When one or more CD changers, or two or more MD changers are connected. To return to normal play mode, select "REPOFF" or "SHUF-OFF. " Tip "SHUF-ALL" will not shuffle tracks between CD units and MD changers. Unit number Disc number You can select a disc from the list when connecting a CD changer with the CUSTOM FILE function or an MD changer. After 5 seconds, the unit returns to normal play mode. 3 Press (SEEK) ­/+ to play the disc. With the card remote commander In step 2, to select the disc, press M or m. The corresponding buttons on the rotary commander control the same functions as those on this unit. If your car has been parked in direct sunlight, allow the unit to cool off before operating it. ⷠPower aerial will extend automatically while the unit is operating. On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. [. . . ] Stored stations and correct time are erased. Makes noise when the position of the ignition key is switched. T Install the unit at an angle of less than 45° in a sturdy part of the car. "MS" or "MD" does not appear on the source display when both the optional MGSX1 and MD changer are connected. [. . . ]