User manual SONY CDX-F7750

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. [. . . ] Repeat this operation until the entire name is entered. The labelling is complete and the display returns to normal play mode. To correct or erase a character, overwrite or enter " s. " · The Disc Memo always takes priority over any prerecorded title. You can label a disc on the unit if a changer with the CUSTOM FILE function is connected. "Repeat Track" and all shuffle play are suspended until the labelling is complete. Then, press again within 2 seconds and hold. Repeat and shuffle play (With the card remote commander) 1 Select the unit that has stored the custom name you want to delete, then press (MENU). 2 Press M or m repeatedly until "Name Delete" appears, then press (ENTER). Repeat step 3 and 4 if you want to delete other names. *1 When one or more CD/MD changers are connected. *2 When one or more CD changers, or two or more MD changers are connected. To return to normal play mode, select "Repeat off" or "Shuffle off. " Tip "Shuffle All" will not shuffle tracks between CD units and MD changers. When you play a disc in a CD changer with the CUSTOM FILE function, you can label each disc with a custom name up to 8 characters (Disc Memo). if you label a disc , the name appears on the list. (With the card remote commander) 1 While playing a disc that you want to label, press (MENU). 2 Press M or m repeatedly until "Name Edit" appears, then press (ENTER). You can select a disc from the list when connecting a CD changer with the CUSTOM FILE function or an MD changer. Tip You can also change the operative direction of these controls in the menu (page 12). The corresponding buttons on the rotary commander control the same functions as those on this unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers. [. . . ] Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's aerial booster (only when your car has built-in FM/MW/LW aerial in the rear/side glass). When the DSO mode is on, the sound is sometimes hampered by noises. The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI Seek" appears). NO Album Name A group name is not written in the track. [. . . ]