User manual SONY CDX-GT33U

[. . . ] Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Warning if your car's ignition has no ACC position Be sure to set the Auto Off function (page 13). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold (OFF) until the display disappears each time you turn the ignition off. [. . . ] notes · Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. ⷠDo not detach the front panel during playback of the USB device, otherwise USB data may be damaged. ⷠThis unit cannot recognize USB devices via a USB hub. The CT function may not work even though an RDS station is being received. ⷠThere might be a difference between the time set by the CT function and the actual time. Other functions Changing the sound settings * Album number is displayed only when the album is changed. Do not leave a USB device in a parked car, as malfunction may result. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately. "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. Repeat and shuffle play During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. To return to normal play mode, select " or "SHUF OFF. The following items can be set (follow the page reference for details): "z" indicates the default settings. OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off. LOCAL (Local Seek Mode) ­ "LOCAL-ON" : to only tune into stations with stronger signals. LOUD (Loudness) To allow you to listen clearly at low volume levels. By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Card remote commander RM-X114 The corresponding buttons on the card remote commander control the same functions as those on this unit. The following buttons on the card remote commander have also different buttons/functions from the unit. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. Connecting cord* (not supplied) * Be sure to use a straight type plug. [. . . ] Makes noise when the position of the ignition is switched. The leads are not matched correctly with the car's accessory power connector. Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's antenna (aerial) booster (only when your car has built-in FM/MW/LW antenna (aerial) in the rear/side glass). HUB NO SUPRT USB HUB is not supported on this unit. [. . . ]