User manual SONY CDX-GT350MP

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] · Be sure not to drop the panel when detaching it from the unit. · If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. · When carrying the front panel with you, use the supplied front panel case. 6 Turning the unit on/off Turning on the unit Press (SOURCE) or insert a CD in the unit. For details on operation, refer to page 8 (CD player) and page 10 (radio). Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 1 Turning off the unit Press (OFF) to stop CD/MD playback or FM/ AM reception (the key illumination and display remain on). Press (OFF) for two seconds to completely turn the unit off. Press (MENU), then press either side of (PRST) repeatedly until "CLOCK" appears. 1 Press (ENTER). Note If your car has no ACC position on the ignition key switch, be sure to turn the unit off by pressing (OFF) for two seconds to avoid car battery wear. The hour indication flashes. How to use the menu This unit is operated by selecting items from a menu. To select, first enter the menu mode and choose up/down ((+)/(­) of (PRST)), or choose left/right ((­)/(+) of (SEEK/AMS)). (PRST) (+): to select upwards 2 Press either side of (PRST) to set the hour. 3 Press (+) side of (SEEK/AMS). The minute indication flashes. SOURCE 4 Press either side of (PRST) to set the minute. (­): to select downwards (SEEK/AMS) 2 (­): to select leftwards SOURCE Press (ENTER). (+): to select rightwards The clock starts. After the clock setting is completed, the display returns to normal play mode. Note In the initial setting, the clock indication appears while the unit is turned off. When the D. INFO mode is set to ON, the time is always displayed (page 16). 7 Changing the display item CD Player Listening to a CD 1 Press (OPEN) and insert the CD. Labeled side up Each time you press (DSPL) during CD TEXT disc playback, the item changes as follows: V Track number/ Elapsed playback time V Disc name/Artist name*1 V Track name*2 Z *1 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) *2 If the track name of a CD TEXT disc is not prerecorded, "TRACK" and "NO NAME" appear in the display. 2 Close the front panel. Press the (+) side of (SEEK/AMS) until "MONO-ON" appears. The sound improves, but becomes monaural ("ST" disappears). Press (ENTER). Storing the station names 3 1 2 3 Tune in a station whose name you want to store. Press (MENU), then press either side of (PRST) repeatedly until "NAME EDIT" appears. Press (ENTER). To return to normal mode, select "MONO-OFF" in step 2. Automatical reception frequency adjustment -- IF AUTO function If interference occurs, the "IF AUTO" function of this unit will automatically avoid noise and narrow the reception frequency. In such cases, some FM stereo broadcasts may become monaural. If you would like to hear such broadcasts in stereo, manually switch to the "WIDE" setting. 4 1 2 3 During radio reception, press (MENU), then press either side of (PRST) repeatedly until "IF AUTO" appears. Press the (+) side of (SEEK/AMS) until "WIDE" appears. 1 Press the (+) side of (PRST) repeatedly to select the desired characters. (A t B t C t ··· Z t 0 t 1 t 2 t ··· 9 t + t ­ t * t / t \ t > t < t. t_) Note When you widen the frequency signal reception setting ("WIDE" mode), some interference may occur. If you press the (­) side of (PRST) repeatedly, the characters appear in the reverse order. If you want to put a blank space between characters, select "_" (underbar). [. . . ] 182 × 53 × 162 mm (7 1/4 × 2 1/8 × 6 1/2 in. ) (w/h/d) Approx. 10 oz. ) Parts for installation and connections (1 set) Front panel case (1) Rotary commander RM-X4S * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block. Tuner section FM CDX-GT350MP 87. 5 ­ 107. 9 MHz CDX-4005 FM tuning interval: 50 kHz/200 kHz switchable 87. 5 ­ 108 MHz (at 50 kHz step) 87. 5 ­ 107. 9 MHz (at 200 kHz step) Antenna terminal External antenna connector Intermediate frequency 10. 7 MHz/450 kHz Usable sensitivity 8 dBf Selectivity 75 dB at 400 kHz Signal-to-noise ratio 66 dB (stereo), 72 dB (mono) Harmonic distortion at 1 kHz 0. 6 % (stereo), 0. 3 % (mono) Separation 35 dB at 1 kHz Frequency response 30 ­ 15, 000 Hz Tuning range Tone controls Power requirements Dimensions Mounting dimensions Mass Supplied accessories Optional accessories Design and specifications are subject to change without notice. AM Tuning range CDX-GT350MP 530 ­ 1, 710 kHz CDX-4005 AM tuning interval: 9 kHz/10 kHz switchable 531 ­ 1, 602 kHz (at 9 kHz step) 530 ­ 1, 710 kHz (at 10 kHz step) External antenna connector 10. 7 MHz/450 kHz 30 µV Antenna terminal Intermediate frequency Sensitivity 19 Troubleshooting guide The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Problem No sound. Cause/Solution ·Cancel the ATT function. [. . . ]