User manual SONY CDX-GT43IPW

[. . . ] This label is located on the bottom of the chassis. The BBE MP process improves digitally compressed sound, such as MP3, by restoring and enhancing the higher harmonics lost through compression. BBE MP works by generating even-order harmonics from the source material, effectively recovering warmth, detail and nuance. ­ BTM (Best Tuning Memory): the unit selects strong signal stations and stores them. [. . . ] AUX Level To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources. ­ "ALL": to step repeatedly through the display images in all display modes. ­ "SA": to step repeatedly through the display images of Spectrum analyzer. ­ "Movie": to step repeatedly through the display images of Movie mode. iNFO (Display Information) To display the items (depending on the source , etc. ) at the bottom of the display while a image is displayed. "on" (z): to display the items. ­ "off": to not display any items. dimmer To change the brightness of the display. ­ "Auto" (z): to dim the display automatically when you turn lights on. The corresponding buttons on the rotary commander control the same functions as those on this unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers. Note When connecting a portable device, be sure BUS CONTROL IN is not connected. If a device is connected to BUS CONTROL IN, "AUX" cannot be selected with (SOURCE). Tip When connecting both a portable device and a changer, use the optional AUX-IN selector. The following controls on the rotary commander require a different operation from the unit. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. If your car has been parked in direct sunlight, allow the unit to cool off before operating it. Power aerial will extend automatically while the unit is operating. Before playing, clean the discs with a commercially available cleaning cloth. Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. [. . . ] T Press (SOURCE) until "MS" or "MD" appears, then press (MODE) repeatedly. The SEEK starts after a few seconds of listening. The station does not broadcast any traffic announcements despite being TP. The disc cannot play because of some problem. [. . . ]