User manual SONY CDX-GT450U

[. . . ] Be sure to install this unit in the dashboard of the car for safety. for installation and connections , see the supplied installation/ connections manual. This label is located on the bottom of the chassis. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. [. . . ] To return to normal play mode, select " or "SHUF OFF. Sound Settings and Setup Menu Changing the sound settings Searching a track by listening to track passages -- ZAPPINTM While playing back short track passages in a CD or USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. Rotate the control dial until the desired menu item appears, then press it. After "ZAPPIN" appears in the display, playback starts from a passage of the next track. The passage is played for the set time, then a click sounds and the next passage starts. The following items can be set (follow the page reference for details): EQ7 PRESET (page 15) EQ7 SETTING (page 15) POSITION SET POSITION (Listening Position setting) (page 15) ADJ POSITION*1 (Listening Position adjustment) (page 16) SET SW POS*1*2 (Subwoofer Position setting) (page 16) BALANCE Adjusts the sound balance: "RIGHT-15" ­ "CENTER" ­ "LEFT-15. ) AUX VOL*3 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. Press the select button or (ZAP) when a track you want to listen is played back. The track that you select returns to normal play mode from the beginning. To search a track by ZAPPIN mode again, repeat steps 1 and 2. You can select the playback time from about 6 seconds/15 seconds/30 seconds (page 17). You cannot select the passage of the track to playback. Advanced Sound Engine, Sony's new sound engine, creates an ideal in-car sound field with digital signal processing. You can select an equalizer curve from 7 equalizer curves ("XPLOD, " "VOCAL, " "EDGE, " "CRUISE, " "SPACE, " "GRAVITY, " "CUSTOM" or "OFF"). 0 kHz 2 Rotate the control dial to adjust the volume level, then press it. The volume level is adjustable in 1 dB steps, from -6 dB to +6 dB. Rotate the control dial until "EQ7 PRESET" appears, then press it. Rotate the control dial until the desired equalizer curve appears, then press it. Repeat steps 1 and 2 to adjust other frequency ranges. Tip The equalizer curve setting can be memorized for each source. [. . . ] The SEEK starts after a few seconds of listening. The station does not broadcast any traffic announcements despite being TP. You cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub. [. . . ]